Skip to contentSkip to conversation

need a help:EDP discipline implementation

LARTC alouini khalif 2 participants 2 messages May 22, 2002

lore
Share & tools
lore
#0 lore raw

I 'm working in project that consists in

Quoted 26 lines

implementation of a multimedia extension over IP. I set up informations about MPEG Video on the IP option fields.
I want to use this information , in the router side, to implemente a EPD (early packet discart) approche. The EPD approche consists in the following :

-it is based on the data unit information, a data unit
may be fragmentated into many IP packet (number of packet per data unit is varaible)
- when we reatch a limit in the queue,we will reject a
packet that belongs to a new unit and we accept only a
packet that belong to an old unit (with is already enqueued)

this approche, is taked from ATM world, : ip packet is
fragmentated into many cell, then if we have to reject
one cell we must do this for all cells that belong to
the same packet (a unit here is a packet)

Quoted 8 lines

my question is how can i used the traffic control implemented on linux to do that, i'm working with red
hat 7.2 .
if you have any idea, or you dindn't understand me please send me a mail

thanks in advance

___________________________________________________________
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

look at one simple qdisc (tbf, red) copy and extend to your algorithm ...

Quoted 37 lines · On Wed, 22 May 2002, [iso-8859-1] alouini khalif wrote:

I 'm working in project that consists in

Quoted 26 lines

implementation of a multimedia extension over IP. I set up informations about MPEG Video on the IP option fields.
I want to use this information , in the router side, to implemente a EPD (early packet discart) approche. The EPD approche consists in the following :

-it is based on the data unit information, a data unit
may be fragmentated into many IP packet (number of packet per data unit is varaible)
- when we reatch a limit in the queue,we will reject a
packet that belongs to a new unit and we accept only a
packet that belong to an old unit (with is already enqueued)

this approche, is taked from ATM world, : ip packet is
fragmentated into many cell, then if we have to reject
one cell we must do this for all cells that belong to
the same packet (a unit here is a packet)

Quoted 8 lines

my question is how can i used the traffic control implemented on linux to do that, i'm working with red
hat 7.2 .
if you have any idea, or you dindn't understand me please send me a mail

thanks in advance

Quoted 8 lines

___________________________________________________________
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/