Skip to contentSkip to conversation

Bandwidth Problems

LARTC Rendel, Thorsten 2 participants 2 messages May 24, 2002

lore
Share & tools
lore
#0 lore raw

hi,
i use the tc tool to shape traffic. in my testbed i have 3 pc´s. 2 of them act as server and client for the iperf traffic generator programm. the 3. pc is my traffic router.
i used in my tests the tbf, cbq and htb qdisc. i wanted to shape traffic form 50 Mbit/s to 5 Mbit/s. i used a small packet size in my tests (64byte). the result was horrible. None of this qidsc couldn´t shape may traffic to its allocate rate. Does anybody know a solution for this problem?
Thanx in advance.
Thorsten
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines · Thorsten

hi,
i use the tc tool to shape traffic. in my testbed i have 3 pc´s. 2 of them act as server and client for the iperf traffic generator programm. the 3. pc is my traffic router. i used in my tests the tbf, cbq and htb qdisc. i wanted to shape traffic form 50 Mbit/s to 5 Mbit/s. i used a small packet size in my tests (64byte). the result was horrible. None of this qidsc couldn´t shape may traffic to its allocate rate. Does anybody know a solution for this problem?

I have the same setup, but I use ttcp als traffic generator with default packet size. Cbq/htb/tbf works with no problem. You can find the results and scripts on www.docum.org

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/