nat
I'm trying to set up a nat here to forward traffic directed to 193.212.64.52 to 192.168.0.7 by usingip route add nat 193.212.64.52 via 192.168.0.7
Doing a traceroute on that shows me it works fine.
But when I try to do it the other way around I seem to be banging my head against the wall. I follow the instructions per ip-cref:ip route add prio 320 from 192.168.0.7 nat 193.212.64.53. But this only gives me "RTNETLINK answers: Invalid argument"
Any pointers on what might be wrong?
Signature · 3 lines
Alexander Brill <[email protected]> http://www.project23.no PGP-key: http://alexb.egil.org/key.pub
Quoted 17 lines · Martin A. Brown
Alexander,
Are you sure you do not mean
ip rule add prio 320 from 192.168.0.7 nat 193.212.64.53
It seems that you have no problem with your nat rule, you just forgot about the rule based entry to rewrite the packet outbound.
Try the above line and then
ip route flush cache
-Martin
On 28 May 2002, Alexander Brill wrote:
Quoted 14 lines
: I'm trying to set up a nat here to forward traffic directed to : 193.212.64.52 to 192.168.0.7 by using
:ip route add nat 193.212.64.52 via 192.168.0.7
:
: Doing a traceroute on that shows me it works fine.
: But when I try to do it the other way around I seem to be banging my : head against the wall. I follow the instructions per ip-cref:
:ip route add prio 320 from 192.168.0.7 nat 193.212.64.53. But this : only gives me "RTNETLINK answers: Invalid argument"
:
: Any pointers on what might be wrong?
:
:
Hmm, it worked now, even though it was the exact command I gave it earlier... strange.
But when I try to connect to a host from 192.168.0.7 the host I connect to still says I'm connecting from 193.212.64.40 (my firewall).
Also, when there will be traffic trying to connect to 193.212.64.52 they will go through standard iptable-rules, right? Meaning that I must allow traffic destined for 193.212.64.52 through?
Signature · 3 lines
Alexander Brill <[email protected]> http://www.project23.no PGP-key: http://alexb.egil.org/key.pub
[LARTC] NAT
In reply to Alexander BrillHi, is there _ANY_ way to identyfy NAT connestions if i want to know is there are ANY NAT connections in the company network?
Info:
wlan network, many routers, many wireless access points many users
no shaping to the outgoing world (Internet) want to BAN NAT connections
thanx
maco
--
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/