Skip to contentSkip to conversation

Traffic shaping using HTB

LARTC Kaustubh S. Phanse 2 participants 2 messages Jun 7, 2002

lore
Share & tools
lore
#0 lore raw

Hello! everyone,

For performing traffic shaping using HTB, is there a parameter to
define the queue or buffer length where packets get queued (once the allocated bandwidth is being used up), instead of just getting dropped (policed). For example, in TBF there is a parameter "limit". If the limit parameter is greater than the burst size, then packets that do not obey the token bucket meter get queued, so the traffic is shaped.

Thanking in advance
regards
Kaustubh

#1 lore raw

No. TBF has it because it is classless. In HTB you can add child qdisc which can set the depth (e.g.pfifo). devik

Quoted 9 lines · Kaustubh S. Phanse

Hello! everyone,

For performing traffic shaping using HTB, is there a parameter to
define the queue or buffer length where packets get queued (once the allocated bandwidth is being used up), instead of just getting dropped (policed). For example, in TBF there is a parameter "limit". If the limit parameter is greater than the burst size, then packets that do not obey the token bucket meter get queued, so the traffic is shaped.

Quoted 4 lines

Thanking in advance
regards
Kaustubh

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/