limiting to a port
one user is utilising to much :80 traffic, how would i limit traffic?
Our current bandwidth is 256Kb, i would like to shape the user down 64Kb.
Signature · 3 lines
ph33r! Linux mdew 2.4.18-xfs #2 Fri Apr 26 15:09:11 NZST 2002 i686 unknown GPG Key: http://mdew.orcon.net.nz/gpg
Quoted 4 lines · mdew
one user is utilising to much :80 traffic, how would i limit traffic?
Our current bandwidth is 256Kb, i would like to shape the user down 64Kb.
You have to attach a htb or cbq qdisc. Create a class with limited bandiwdth and redirect all traffic to port 80 to that class with a filter.
See the lartc howto and/or www.docum.org for more info.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Stef Coene
Quoted 4 lines · mdew
one user is utilising to much :80 traffic, how would i limit traffic?
Our current bandwidth is 256Kb, i would like to shape the user down 64Kb.
You have to attach a htb or cbq qdisc. Create a class with limited bandiwdth and redirect all traffic to port 80 to that class with a filter.
See the lartc howto and/or www.docum.org for more info.
is it possible to get an example of this? Ive read the adv routing howto and found it terribly confusing. :(
thanks.
Signature · 3 lines
ph33r! Linux mdew 2.4.18-xfs #2 Fri Apr 26 15:09:11 NZST 2002 i686 unknown GPG Key: http://mdew.orcon.net.nz/gpg
Quoted 9 lines · Stef Coene
Quoted 4 lines · mdew
one user is utilising to much :80 traffic, how would i limit traffic?
Our current bandwidth is 256Kb, i would like to shape the user down 64Kb.
You have to attach a htb or cbq qdisc. Create a class with limited bandiwdth and redirect all traffic to port 80 to that class with a filter.
See the lartc howto and/or www.docum.org for more info.
from an example off the website, ive change a couple of values... what do i need to start limiting to *only* port 80
#!/bin/sh
RATE_TOT=256kbps
RATE1=128kbps
IP=210.54.175.12
DEV="dev eth0"
OPTION="allot 1514 maxburst 20 avpkt 1000"
tc qdisc del $DEV root
tc qdisc add $DEV root handle 10: cbq bandwidth 10mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:1 cbq bandwidth 10mbit rate $RATE_TOT $OPTION prio 3 isolated
tc class add $DEV parent 10:1 classid 10:10 cbq bandwidth 10mbit rate $RATE1 $OPTION prio 3 bounded
tc filter add $DEV parent 10: protocol ip prio 3 handle 1 fw classid 10:1
tc filter add $DEV parent 10:1 protocol ip prio 3 handle 1 fw classid 10:10
iptables -F
iptables -X
iptables -N acc_0
iptables -N acc_1
iptables -A OUTPUT -t mangle -p tcp --dport 2000 -d $IP -j MARK --set-mark 1
iptables -A OUTPUT -p tcp --dport 2000 -d $IP -j acc_0
Signature · 3 lines
ph33r! Linux mdew 2.4.18-xfs #2 Fri Apr 26 15:09:11 NZST 2002 i686 unknown GPG Key: http://mdew.orcon.net.nz/gpg
Quoted 7 lines · mdew
Quoted 6 lines · Stef Coene
Quoted 4 lines · mdew
one user is utilising to much :80 traffic, how would i limit traffic?
Our current bandwidth is 256Kb, i would like to shape the user down 64Kb.
Quoted 8 lines
Quoted 5 lines
You have to attach a htb or cbq qdisc. Create a class with limited bandiwdth and redirect all traffic to port 80 to that class with a filter.
See the lartc howto and/or www.docum.org for more info.
from an example off the website, ive change a couple of values... what do i need to start limiting to *only* port 80
-dport is the destination port. So change it to -dport 80. This will mark all packets to port 80 with mark 1. But the setup is more complicated. You also need to mark the packets not to port 80 and put it in the other chain.
Quoted 21 lines
#!/bin/sh
RATE_TOT=256kbps
RATE1=128kbpsIP=210.54.175.12
DEV="dev eth0"
OPTION="allot 1514 maxburst 20 avpkt 1000"tc qdisc del $DEV root
tc qdisc add $DEV root handle 10: cbq bandwidth 10mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:1 cbq bandwidth 10mbit rate $RATE_TOT $OPTION prio 3 isolated
tc class add $DEV parent 10:1 classid 10:10 cbq bandwidth 10mbit rate $RATE1 $OPTION prio 3 boundedtc filter add $DEV parent 10: protocol ip prio 3 handle 1 fw classid 10:1
tc filter add $DEV parent 10:1 protocol ip prio 3 handle 1 fw classid 10:10
Quoted 7 lines
iptables -F
iptables -X
iptables -Nacc_0
iptables -Nacc_1
iptables -A OUTPUT -t mangle -p tcp --dport 2000 -d $IP -j MARK --set-mark 1
iptables -A OUTPUT -p tcp --dport 2000 -d $IP -jacc_0
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/