Skip to contentSkip to conversation

priority for voip

LARTC ganesh kumar godavari 1 participant 2 messages Jul 1, 2002

lore
Share & tools
lore
#0 lore raw

hello stef,
this is the information i got from microsoft website
(http://support.microsoft.com/default.aspx?scid=kb;EN-US;q158623)

***************************
NetMeeting uses the following Internet Protocol (IP) ports:
Port Purpose
-------------------------------------
389 Internet Locator Server [Transmission Control
Protocol (TCP)]

    522       User Location Server (TCP)
    1503      T.120 (TCP)
    1720      H.323 call setup (TCP)
    1731      Audio call control (TCP)
    Dynamic   H.323 call control (TCP)
    Dynamic   H.323 streaming [Realtime Transport Protocol (RTP) 

over User Datagram Protocol (UDP)]
To establish outbound NetMeeting connections through a firewall, the firewall must be configured to do the following:
Pass through primary TCP connections on ports 522, 389, 1503, 1720 and 1731.

Pass through secondary UDP connections on dynamically assigned ports (1024-65535).
*******************************

so as u can see there is no way of determining the port if it were dynamic

any pointers in this regard would be helpful

thanks
ganesh

Quoted 17 lines · On Tue, 02 Jul 2002 Stef Coene wrote :
Quoted 2 lines · ganesh kumar godavari

hai stef,
i looked into your docum.org and lartc.org. for information

on

Quoted 5 lines

giving high priority for voice packets.
i did check with the netfilter group for information on identifying if a packet is a voice/data packet.

i received no response from them. so can u please tell me how

i

Quoted 1 line

can identify if a packet is a voice/data packet so that i

can

Quoted 1 line

mangle it and send to high priority queue.

I have no idea how you can identify voip packets. Is it using a fixed dst
port of maybe host so you can use that in the filter?

Quoted 8 lines

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net

_________________________________________________________
There is always a better job for you at Monsterindia.com. Go now http://monsterindia.com/rediffin/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

hello stef,
this is the information i got from microsoft website
(http://support.microsoft.com/default.aspx?scid=kb;EN-US;q158623)

***************************
NetMeeting uses the following Internet Protocol (IP) ports:
Port Purpose
-------------------------------------
389 Internet Locator Server [Transmission Control
Protocol (TCP)]

    522       User Location Server (TCP)
    1503      T.120 (TCP)
    1720      H.323 call setup (TCP)
    1731      Audio call control (TCP)
    Dynamic   H.323 call control (TCP)
    Dynamic   H.323 streaming [Realtime Transport Protocol (RTP) 

over User Datagram Protocol (UDP)]
To establish outbound NetMeeting connections through a firewall, the firewall must be configured to do the following:
Pass through primary TCP connections on ports 522, 389, 1503, 1720 and 1731.

Pass through secondary UDP connections on dynamically assigned ports (1024-65535).
*******************************

so as u can see there is no way of determining the port if it were dynamic

any pointers in this regard would be helpful

thanks
ganesh

Quoted 17 lines · On Tue, 02 Jul 2002 Stef Coene wrote :
Quoted 2 lines · ganesh kumar godavari

hai stef,
i looked into your docum.org and lartc.org. for information

on

Quoted 5 lines

giving high priority for voice packets.
i did check with the netfilter group for information on identifying if a packet is a voice/data packet.

i received no response from them. so can u please tell me how

i

Quoted 1 line

can identify if a packet is a voice/data packet so that i

can

Quoted 1 line

mangle it and send to high priority queue.

I have no idea how you can identify voip packets. Is it using a fixed dst
port of maybe host so you can use that in the filter?

Quoted 8 lines

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net

_________________________________________________________
There is always a better job for you at Monsterindia.com. Go now http://monsterindia.com/rediffin/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/