Lack of filtering?
Hi all,
I have been attempting to get to know the basics of CBQ. Having followed the example at http://lartc.org/HOWTO//cvs/2.4routing/lartc.html in Section 9.5.4.4, I find myself somewhat baffled.
I have checked & double-checked the commands entered and they conform to the above (though my bandwidth limits are different). What I fail to see, using tc -s class show dev eth0 && tc -s qdisc show, is any filtering being performed:
[root@gw rc.d]# tc -s class show dev eth0 && tc -s qdisc show class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
Sent 253851 bytes 3784 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 40Kbit (bounded) prio no-transmit
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 4.52356e+06 undertime 0
class cbq 1:3 parent 1:1 leaf 30: rate 30Kbit prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 6.03733e+06 undertime 0
class cbq 1:4 parent 1:1 leaf 40: rate 3Kbit prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 6.0533e+07 undertime 0
qdisc sfq 40: dev eth0 quantum 1514b
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 30: dev eth0 quantum 1514b
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc cbq 1: dev eth0 rate 10Mbit (bounded,isolated) prio no-transmit Sent 253851 bytes 3784 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
Using tc filter show dev eth0, I get the following:
filter parent 1: protocol ip pref 1 u32
filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:3
match 00500000/ffff0000 at 20
filter parent 1: protocol ip pref 1 u32 fh 800::801 order 2049 key ht 800 bkt 0 flowid 1:2
match 0a000003/ffffffff at 12
There is one change to the filter rule given in the example: the second filter matches against the ip address 10.0.0.3 (my box). I did this to ensure all my traffic would get matched.
Should I be expecting to see something from the stats (it makes sense to me that I should!)? If so, could someone point me in the direction of where I may be going wrong? If not, where should I be looking?
To be clear, here are the commands I used:
[root@gw rc.d]# tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10Mbit avpkt 1000 cell 8
[root@gw rc.d]# tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 10Mbit rate 40kbit weight 0.4kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
[root@gw rc.d]# tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 10Mbit rate 30kbit weight 0.3kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000
[root@gw rc.d]# tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 10Mbit rate 3kbit weight 0.03kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000
[root@gw rc.d]# tc qdisc add dev eth0 parent 1:3 handle 30: sfq [root@gw rc.d]# tc qdisc add dev eth0 parent 1:4 handle 40: sfq [root@gw rc.d]# tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:3
[root@gw rc.d]# tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 10.0.0.3 flowid 1:2
Kernel is v2.4.18.
Cheers,
Pete Mee
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/