Ethernet interface shuts down
Hi All,
I have three Linux boxes running RH7.2 and each one of these has two 3com Ethernet NICs. I am trying to do some routing stuff with these.
Ethernet interfaces on these boxes shut down by its own if I do not pass the packet through them for a while. I am not able to understand why is it happening.
One more thing when I use “ip addr show” it shows that interface is there , but ifconfig doesn’t. I guess that is because ifconfig shows only the interfaces that are up.
Any help on this will be really appreciable .
Thanks in advance,
Nitin
__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · nitin panjwani
Hi All,
I have three Linux boxes running RH7.2 and each one of these has two 3com Ethernet NICs. I am trying to do some routing stuff with these.
Ethernet interfaces on these boxes shut down by its own if I do not pass the packet through them for a while. I am not able to understand why is it happening.
I think you are running some kind of router daemon like routed, gated or Zebra. Just turn it off.
Quoted 4 lines
One more thing when I use ?ip addr show? it shows that interface is there , but ifconfig doesn?t. I guess that is because ifconfig shows only the interfaces that are up.
ifconfig -a will show it.
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/