HTB does not work
Hi
Could someone help me. I'm successfully install htb patches and new tc binary, but htb won't work
[root@watcher root]# uname -a
Linux watcher.adamant.ua 2.4.19-pre8-ac5 #2 Wed Jul 10 10:08:55 EEST 2002 i686 unknown
[root@watcher root]# lsmod
Module Size Used by Not taintedsch_htb 13888 0 (autoclean) (unused)
...
[root@watcher root]# tc qdisc change dev eth0.2 root handle 2: htb
RTNETLINK answers: No such file or directory [root@watcher root]# tc qdisc change dev eth0 root handle 2:
htb
RTNETLINK answers: No such file or directory [root@watcher root]# tc qdisc change dev lo root handle 2:
htb
RTNETLINK answers: No such file or directory [root@watcher root]#
why?
Signature · 6 lines
Best regard, Alexander Trotsai aka MAGE-RIPE aka MAGE-UANIC My PGP at ftp://blackhole.adamant.net/pgp/trotsai.key[.asc] Big trouble - Decreasing electron flux _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
And some other tries
[root@watcher root]# tc qdisc del dev eth0 root RTNETLINK answers: No such file or directory [root@watcher root]# tc qdisc del dev eth0.2 root RTNETLINK answers: No such file or directory [root@watcher root]# tc qdisc add dev eth0 root handle 1:
htb default 20
RTNETLINK answers: Invalid argument
[root@watcher root]# tc qdisc add dev eth0 root handle 1:
htb
RTNETLINK answers: Invalid argument
[root@watcher root]# tc qdisc add dev eth0.2 root handle 1:
htb default 20
RTNETLINK answers: Invalid argument
ps. Could I use htb queuening on dotQ subinterfaces?
On Wed, Jul 10, 2002 at 11:04:35AM +0300, Alexander Trotsai wrote:
AT>Hi
AT>Could someone help me. I'm successfully install htb patches AT>and new tc binary, but htb won't work
AT>[root@watcher root]# uname -a
AT>Linux watcher.adamant.ua 2.4.19-pre8-ac5 #2 Wed Jul 10 AT>10:08:55 EEST 2002 i686 unknown
AT>[root@watcher root]# lsmod
AT>Module Size Used by Not tainted
AT>sch_htb 13888 0 (autoclean) (unused)
AT>...
AT>[root@watcher root]# tc qdisc change dev eth0.2 root handle AT>2: htb
AT>RTNETLINK answers: No such file or directory AT>[root@watcher root]# tc qdisc change dev eth0 root handle 2:
AT>htb
AT>RTNETLINK answers: No such file or directory AT>[root@watcher root]# tc qdisc change dev lo root handle 2:
AT>htb
AT>RTNETLINK answers: No such file or directory AT>[root@watcher root]#
AT>why?
AT>--
AT>Best regard, Alexander Trotsai aka MAGE-RIPE aka MAGE-UANIC AT>My PGP at ftp://blackhole.adamant.net/pgp/trotsai.key[.asc] AT>Big trouble - Decreasing electron flux AT>_______________________________________________
AT>LARTC mailing list / [email protected] AT>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 6 lines
Best regard, Alexander Trotsai aka MAGE-RIPE aka MAGE-UANIC My PGP at ftp://blackhole.adamant.net/pgp/trotsai.key[.asc] Big trouble - Cache miss - please take better aim next time _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Alexander Trotsai
[root@watcher root]# tc qdisc add dev eth0 root handle 1:
htb default 20
Make doubly sure that you are running a patched tc. Verify which tc you are running - perhaps an old one is lying around.
Quoted 1 line
ps. Could I use htb queuening on dotQ subinterfaces?
I think you can, but don't trust me on that.
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/