Skip to contentSkip to conversation

Ethernet interface shuts down

LARTC nitin panjwani 1 participant 1 message Jul 11, 2002

lore
Share & tools
lore
#0 lore raw

Bert thanks for your reply

It seems routing daemons are not creating problem. with:
"ifconfig eth1 up "

I find that I am able to make interface up again, but it disappears after a while if I do not do anything on this machine for a while and comes back again with "ifconfig eth1 up "

I have another similar kind of problem.
I will describe it:

(R1)eth0-------eth1(R2)

If for certain time I do not work on the machine then I am not able to ping the remote interface .eg eth0 from R2 and eth1 from R1.While local interfaces are pingable and ifconfig/ip addr shows that that interfaces are up on both sides.

Initailly when I rebooted both machines these two boxes were mutually pingable.ip route also recognizes the availability of the networks.

In this case also I am not running Any routing daemon.

Any help on this will be very appreciable.

Thanks in advance,
Nitin

__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/