Shaping per type/size of connection
Hi!
Currently I'm controlling 4 Mbit Connection based on the source and destination ports, so that ftp traffic doesn't clog the line and udp packets and other time critical things (ssh, irc, etc...) get priority.
Normally that works just fine, but two problems remain:
- How do I recognize traffic from non-standard ports? (like a ftp-server on port 1337)
- Big http-transfers still clog the line
I want my users to be able to surf fast. But when they download big files from a webserver this transfer should be slowed down.
Perhaps a way to slow down any connection that exceeds a certain size would solve both problems. Any suggestions, pointers or ideas for a better policy are welcome!
Arvid
Signature · 6 lines
in bunten Bildern wenig Klarheit, viel Irrtum und ein Fünkchen Wahrheit (Johann Wolfgang v. Goethe) _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
Hi!
Currently I'm controlling 4 Mbit Connection based on
the source and
Quoted 1 line
destination ports, so that ftp traffic doesn't clog
the line and udp packets
Quoted 1 line
and other time critical things (ssh, irc, etc...) get
priority.
Quoted 2 lines
Normally that works just fine, but two problems
remain:
Quoted 6 lines
- How do I recognize traffic from non-standard ports? (like a ftp-server on port 1337)
- Big http-transfers still clog the line
I want my users to be able to surf fast. But when
they download
Quoted 1 line
big files from a webserver this transfer should be
slowed down.
Quoted 2 lines
Perhaps a way to slow down any connection that
exceeds a certain size would
Quoted 1 line
solve both problems. Any suggestions, pointers or
ideas for a better policy
Quoted 1 line
are welcome!
WFQ seems to do just this, but in lack of any real implementation there is wrr:
http://wipl-wrr.sourceforge.net/
It has the ability to automatically lower the weights of streams with high bandwidth-usage.
---
John Bäckstrand
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · John Bäckstrand
Quoted 3 lines
Perhaps a way to slow down any connection that exceeds a certain size would solve both problems. Any suggestions, pointers or ideas for a better policy are welcome!
WFQ seems to do just this, but in lack of any real implementation there is wrr:
I just tried it, but it didn't seem to work. At least I could not make out any difference between with or without shaping (same lousy behaviour when one host started too much traffic). The clases DID receive traffic, as far as I can tell from a 'tc -s qdisc'. Perhaps I missed something with the parameters and misconfigured it. :-(
But I managed to crash my router several times (kernel panik) when using the wrr-module.
cu
Arvid
Signature · 6 lines
in bunten Bildern wenig Klarheit, viel Irrtum und ein Fünkchen Wahrheit (Johann Wolfgang v. Goethe) _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · John Bäckstrand
Quoted 1 line
Quoted 1 line
Perhaps a way to slow down any connection that
exceeds a certain size
Quoted 1 line
Quoted 1 line
Quoted 1 line
would solve both problems. Any suggestions,
pointers or ideas for a
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
better policy are welcome!
WFQ seems to do just this, but in lack of any real implementation there is wrr:
I just tried it, but it didn't seem to work. At least
I could not make out
Quoted 1 line
any difference between with or without shaping (same
lousy behaviour when
Quoted 1 line
one host started too much traffic). The clases DID
receive traffic, as far
Quoted 1 line
as I can tell from a 'tc -s qdisc'. Perhaps I missed
something with the
Quoted 3 lines
parameters and misconfigured it. :-(
But I managed to crash my router several times
(kernel panik) when using the
Quoted 1 line
wrr-module.
Hmm, Ive been using it a day or so with 2 boxes, no problems at all, though I havent been able to test with different amount of traffic if the weighing really works. Which kernel are you using? Did you ask about your problems on the wrr mailinglist?
---
John Bäckstrand
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/