Skip to contentSkip to conversation

Frozen machine with adding a tc filter

LARTC Alberto Bertogli 1 participant 1 message Jul 22, 2002

lore
Share & tools
lore
#0 lore raw

Hi!

This is a (really early) bug report on one i just caught when setting a filter for traffic control.

It makes the machine to frozen solid, without even an oops. Keyboard is not responsive (neither sysrq nor the num/caps/screen lock leds), everything seems quite dead.

It's fully reproducible, i tried both 2.4.13 and 2.4.19-rc3 (the last one with htb patches, but i don't think it's related).

The machine is an iPII with 256Mb RAM, it has been working well for about a year and a half.

Basically a main cbq class with two (also cbq) leaves:
tc qdisc add dev eth1 root handle 20:0 cbq bandwidth 100Mbit avpkt 1000 tc class add dev eth1 parent 20:0 classid 20:1 $EST cbq bandwidth 100Mbit \
rate 2800Kbit bounded isolated $CBQ_PARAMS

($EST is empty and $CBQ_PARAMS is "allot 1514 avpkt 1000")

Both leaves are basically the same, just a cbq class with parent 20:1 and then sfq attached as qdisc; really simple. I have another set pretty much like this one, only with one leave, on eth0.

The command which frozes the machine is
tc filter add dev eth1 parent 20:0 protocol ip handle 5 fw classid 20:0

I know it's weird, but anyway i don't think that a lockup is the error the user deserves =)

Setting classid 20:X (X != 0) works as expected.

As this is quite early (just hit it) i don't know if i can reproduce it using another scenario.

Tomorrow i'll try to dig into it on a testing machine and i'll post the results.

Thanks,
Alberto

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/