Skip to contentSkip to conversation

TC bug? Mixing u32 and FW filters.

LARTC mahhy 1 participant 1 message Jul 24, 2002

lore
Share & tools
lore

mahhy

author
#0 lore raw

I've noticed some strange behaivour in tc and can't seem to find a definate "this is a bug" or "this is not a bug". Figured I'd ask the list.

I'm using HTB2 and HTB3, on different machines. This happened on both of them.

I've created a few different classes and quite a few filters. All of my filters were previously u32 filters. (wont bother posting the exact script, its fairly long, works on 3 separate interfaces, etc)

I started to mark FTP packets using iptables (trying for both active and passive ftp), which seems to work fine.

When I added a FW filter:

/sbin/tc filter add dev eth1 protocol ip parent 1: prio 1 handle 5 fw classid 1:24

I got the infamous:

RTNETLINK answers: Invalid argument

After a few hours of experimentation, I realized that if I changed the filters PRIO to something not used by one of the u32 filters, all went well. i.e.:

/sbin/tc filter add dev eth1 protocol ip parent 1: prio 5 handle 5 fw classid 1:24

Has anyone seen this before? Anyone know if it is definately a bug or not? Or is it something very strange specific to my setup?

Signature · 7 lines
Rob Rankin
[email protected]
http://undertow.ca

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/