Skip to contentSkip to conversation

RTNETLINK answers: Invalid argument, fwmark

LARTC David Watson 2 participants 3 messages Jul 26, 2002 – Jul 30, 2002

lore
Share & tools
lore
#0 lore raw

I'm using htb classes on my firewall to queue traffic and implement
different restrictions on different protocols.

tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 190
tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k
tc qdisc add dev eth0 parent 1:90 handle 190: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 310: sfq perturb 10

tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:3

This last line gets a "RTNETLINK answers: Invalid argument"

I'm using kernel 2.4.18 with the htb and wrr patches on both the kernel and on tc
in the kernel .config I have:

CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y

I'm not really sure where else I could be going wrong, any advice would be
greatly appreciated.
_____________________________________________________________
David Watson, Network Manager, Team17 Software Ltd.
Phone: +44-1924-267776 Fax: +44-1924-267658
_____________________________________________________________

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 20 lines · David Watson

I'm using htb classes on my firewall to queue traffic and implement different restrictions on different protocols.

tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 190
tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k
tc qdisc add dev eth0 parent 1:90 handle 190: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 310: sfq perturb 10

tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:3

This last line gets a "RTNETLINK answers: Invalid argument"

I'm using kernel 2.4.18 with the htb and wrr patches on both the kernel and on tc
in the kernel .config I have:

Quoted 7 lines

CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y

I'm not really sure where else I could be going wrong, any advice would be
greatly appreciated.

You attach class 1:90 to class 1:1, but you didn't create class 1:1 ??

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to David Watson

I missed a line in my report and I do in fact create a 1:1 class
before attaching to it. I have found that if I change the prio value on the filter lines to unique numbers that I no longer get the error. I am however confused as to the meaning of the prio parameter, and I'm not sure why these filter lines need unique values or exactly what impact these values have.

Quoted 35 lines · Stef Coene
Quoted 20 lines · David Watson

I'm using htb classes on my firewall to queue traffic and implement different restrictions on different protocols.

tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 190
tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k
tc qdisc add dev eth0 parent 1:90 handle 190: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 310: sfq perturb 10

tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:3

This last line gets a "RTNETLINK answers: Invalid argument"

I'm using kernel 2.4.18 with the htb and wrr patches on both the kernel and on tc
in the kernel .config I have:

Quoted 6 lines

CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y

I'm not really sure where else I could be going wrong, any advice

would be

Quoted 1 line

greatly appreciated.

You attach class 1:90 to class 1:1, but you didn't create class 1:1 ??

Stef

--

Quoted 7 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/