Two adapter, One IP address
Hi,
I have a question, is it possible to assign one IP address to two ntework adapter installed on the same Linux box?
Must we use NAT at gateway to enable such a reduant configuation?
Thanks a lot.
Jing
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · shen jing
I have a question, is it possible to assign one IP address to two ntework adapter installed on the same Linux box?
Would the bonding driver support (kernel/network options) be an option for you?
bye,
-christian-
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · shen jing
Hi,
I have a question, is it possible to assign one IP address to two ntework adapter installed on the same Linux box?
It's possible.
Quoted 1 line
Must we use NAT at gateway to enable such a reduant configuation?
If you want to read some about it, you can read the paper called "Some evil ideas about decentralised loadbalancing/clustering, with no single point of failure " on www.ds9a.nl.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/