Skip to contentSkip to conversation

Unable To Telnet

LARTC SoloCDM 1 participant 2 messages Aug 9, 2002

lore
Share & tools
lore

SoloCDM

author
#0 lore raw

Stef Coene stated the following:

Quoted 14 lines · SoloCDM
Quoted 12 lines

I know about ssh, but I still want to telnet to my server within our network and I am unable.

I have /etc/xinetd.d/telnet and /proc/sys/net/ipv4/ip_forward enabled. I don't have any firewall blocking for inside telneting. I can ping the server. I have removed or added lines in both /etc/hosts.allow and /etc/hosts.deny to enable telnet with no success.

The following is the message when I try to telnet:

Quoted 7 lines
Quoted 4 lines

Trying <IP_number>...
telnet: Unable to connect to remote host: Connection refused

What is missing?

Can you log on to the server and do telnet localhost? Can you take a look at /var/log/* to make sure there are no errors?

No -- none of the above. No messages are listed in /var/log/*.

Signature · 9 lines
Note: When you reply to this message, please include the mailing
      list and/or newsgroup address and my email address in To:

*********************************************************************
Signed,
SoloCDM
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#1 lore raw

SoloCDM stated the following:

Quoted 19 lines

Stef Coene stated the following:

Quoted 17 lines · SoloCDM
Quoted 15 lines

I know about ssh, but I still want to telnet to my server within our network and I am unable.

I have /etc/xinetd.d/telnet and /proc/sys/net/ipv4/ip_forward enabled. I don't have any firewall blocking for inside telneting. I can ping the server. I have removed or added lines in both /etc/hosts.allow and /etc/hosts.deny to enable telnet with no success.

The following is the message when I try to telnet:

Trying <IP_number>...
telnet: Unable to connect to remote host: Connection refused

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

What is missing?

Can you log on to the server and do telnet localhost? Can you take a look at /var/log/* to make sure there are no errors?

No -- none of the above. No messages are listed in /var/log/*.

Correction -- I am able to login to the server.

Signature · 9 lines
Note: When you reply to this message, please include the mailing
      list and/or newsgroup address and my email address in To:

*********************************************************************
Signed,
SoloCDM
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/