Skip to contentSkip to conversation

Another sharing tehnique, is this possible ?

LARTC [email protected] 2 participants 3 messages Aug 17, 2002 – Aug 18, 2002

lore
Share & tools
lore
#0 lore raw

hi,
(assume HTB)
I was thinking will it be possible to do some sort of UNFAIR-SHARING :"), what I have in mind :

Say I have a internet link with 100kbits bandwith, then I want to share it between many clients (which will increase over time). Let's i start with 5 clients with rate = 30kbits... See the total bandwith of users is 120kbits but I have only 100kbits.... So where is the problem I want to describe their bandwith like

total 100kbits

 |__ user1 => rate 30kbits, ceil 30kbits
 |__ user2 => rate 30kbits, ceil 30kbits
 |__ user3 => rate 30kbits, ceil 30kbits
 |__  .....................
 |__ userX => rate 30kbits, ceil 30kbits

U can say why I just don't calculate 100/5 = 20 and set for all users "rate 20kbits, ceil 30kbits", 'cause i will add more users in the future and will need to calculate again and again this value... also some of them may want 30kbits other 10kbits etc.... (it is ok for them to get lower rates 'cause the speed is ungaranteed the user are not online 24hours a day and of course when bandwith got used to the max it will upgraded to better speed)..

In fact what I want to say is : the max rate should be X but if the link is overused u will get lower speed ...?? One way this to be done is if I use something like this :

rate 0 ceil desired-speed

but is this possible, or if not what is the lowest possible value....
- Will proirity have be taken into account so that i can say some should be served better than other ?
- the lower possible bandwith i will lend is 9600bps .. yes we have such speeds the price here is big :"(

Thanx alot
raptor
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 26 lines

Say I have a internet link with 100kbits bandwith, then I want to share it between many clients (which will increase over time). Let's i start with 5 clients with rate = 30kbits... See the total bandwith of users is 120kbits but I have only 100kbits.... So where is the problem I want to describe their bandwith like

total 100kbits

 |__ user1 => rate 30kbits, ceil 30kbits
 |__ user2 => rate 30kbits, ceil 30kbits
 |__ user3 => rate 30kbits, ceil 30kbits
 |__  .....................
 |__ userX => rate 30kbits, ceil 30kbits

U can say why I just don't calculate 100/5 = 20 and set for all users "rate 20kbits, ceil 30kbits", 'cause i will add more users in the future and will need to calculate again and again this value... also some of them may want 30kbits other 10kbits etc.... (it is ok for them to get lower rates 'cause the speed is ungaranteed the user are not online 24hours a day and of course when bandwith got used to the max it will upgraded to better speed)..

In fact what I want to say is : the max rate should be X but if the link is overused u will get lower speed ...?? One way this to be done is if I use something like this :

Quoted 6 lines

rate 0 ceil desired-speed

but is this possible, or if not what is the lowest possible value....
- Will proirity have be taken into account so that i can say some should be served better than other ? - the lower possible bandwith i will lend is 9600bps .. yes we have such speeds the price here is big :"(

Normally, each class gets the rate as a minimum. After that, the remaning bandwidth is divided according to the proportions of the rate (more accurate, the quantums) but the classes with the lowest prio will be serverd first. So only remaining bandwidth will be influenced with the prio parameter.

And giving a class rate 0 is a strange idea :)

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to [email protected]
Quoted 19 lines · Ivo De Decker
Quoted 7 lines · Stef Coene

Normally, each class gets the rate as a minimum. After that, the remaning bandwidth is divided according to the proportions of the rate (more accurate, the quantums) but the classes with the lowest prio will be serverd first. So only remaining bandwidth will be influenced with the prio parameter.

And giving a class rate 0 is a strange idea :)

Well, not really:

There might be some sorts of traffic (eg backups) that aren't really prioritary. The classes of this traffic could use borrowed bandwith
exclusively: if there is no other traffic (or not enough to fill the total available bandwith), the backups can happen, but if there is other (higher priority) traffic, the backups can wait till that traffic lessens (assuming this eventually happens, off course).

Quoted 1 line

The question is: is this possible?

If you have a total of 100, give backup 1 and the rest 99. As long as there is no other traffic, backup can get the full bandwidth. But if there is other traffic, it can use up to 99.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/