Skip to contentSkip to conversation

dsmark_dequeue: unsupported protocol 2054

LARTC José Alberto Aguilar González 2 participants 2 messages Aug 27, 2002 – Aug 28, 2002

lore
Share & tools
lore
#1 lore raw
Quoted 4 lines · José Alberto Aguilar González

I am using dsmark in a DS Edge router and I got those "dsmark_dequeue:
unsupported protocol 2054" messages.
I know it is ARP traffic (2054=0x806) and I wonder how can I avoid that kind traffic entering in the dsmark.

Entering dsmark per se isn't a problem. dsmark will happily ignore your ARP traffic as long as you don't ask dsmark to actually (re)mark it. dsmark will notice that you're not trying to (re)mark the packets, if the dsmark class you're sending it to uses value 0 and mask 0xff.

In case you really want to divert non-IP traffic, you need another qdisc around dsmark, and send only IPv4 and IPv6 traffic to the class to which dsmark is attached.

- Werner

Signature · 6 lines
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         [email protected] /
/_http://icapeople.epfl.ch/almesber/_____________________________________/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/