Skip to contentSkip to conversation

Examples from HTB home page...

LARTC eth 2 participants 2 messages Sep 6, 2002

lore
Share & tools
lore

eth

author
#0 lore raw

... do not work anymore. Anybody with a hint? I've got a fully functional HTB setup and just wanted to replace the kernel from 2.4.17 to 2.4.19. In the end the modified tc binary doesn't recognize "tc filter add" (yet it does accept qdisc show and recognizes htb...)

    I've downloaded the 2.4.19 from kernel.org, iproute2 (2.4.7), 

installed the patches (to kern and iproute) and ended with a kernel /
tc combo that at the following example (taken from from HTB page):

tc qdisc add dev eth0 root handle 1:0 htb default 12
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 100kbps ceil 100kbps tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil 100kbps tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil 100kbps tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil 100kbps

tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 1.2.3.4 match ip dport 80 0xffff flowid 1:10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 1.2.3.4 flowid 1:11

... chokes at the "tc filter add " with:

RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument

As far as I can tell this *should* work, it did 6 months ago on a 2.4.17.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · eth

tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 1.2.3.4 match ip dport 80 0xffff flowid 1:10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 1.2.3.4 flowid 1:11
... chokes at the "tc filter add " with:
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
As far as I can tell this *should* work, it did 6 months ago on a 2.4.17.

Maybe your kernel configuration changed in the meantime, and with the new version you didn't compile some necessary features. Have just tried your exact configuration with a 2.4.20-pre1 kernel and it works OK.

It seems you missed "U32 classifier" support either compiled in or as a module. My box show the following modules loaded after trying your config:
Module Size Used by Not tainted

cls_u32                 4484   1  (autoclean)
sch_htb                18016   1  (autoclean)
pcnet32                13120   1  (autoclean)
mii                     1104   0  (autoclean) [pcnet32]
Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Woody (Linux 2.4.19-pre6aa1)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/