Skip to contentSkip to conversation

overlimits value in statistics

LARTC Igor Suvorov 2 participants 3 messages Sep 8, 2002

lore
Share & tools
lore
#0 lore raw

Good Day!

I was interested with a question what exactly is considered in overlimits parameter to count of statistics. I thought, that this parameter should specify number of the packages which have exceeded valid boundary. But, for example statistics on one of queues:

class cbq 20:12 parent 20:10 leaf 8015: rate 128Kbit (bounded) prio 5
Sent 23171746615 bytes 43153460 pkts (dropped 81179, overlimits 641814686) backlog 1p

Queue has passed 43153460 packets, but has exceeded a valid level of 641814686 packets. What it? Errors?

--
Igor

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines · Igor Suvorov

Good Day!

I was interested with a question what exactly is considered in overlimits parameter to count of statistics. I thought, that this parameter should specify number of the packages which have exceeded valid boundary. But, for example statistics on one of queues:

I have some more info on www.docum.org (FAQ page) :

overlimits : Packet is not sended due to ceil or rate restrictions So there was to much data in the class. But don't believe this too much. It depends on how often the qdisc looked for packet. This counter is incremented per unsucessfull DRR loop and it's possible that this happens more then once per packet.
Each dropped packet is overlimited.

Quoted 7 lines

class cbq 20:12 parent 20:10 leaf 8015: rate 128Kbit (bounded) prio 5
Sent 23171746615 bytes 43153460 pkts (dropped 81179, overlimits 641814686) backlog 1p

Queue has passed 43153460 packets, but has exceeded a valid level of 641814686 packets. What it? Errors?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Igor Suvorov

Good Day, Stef!

Quoted 6 lines · you
Quoted 6 lines

I was interested with a question what exactly is considered in overlimits parameter to count of statistics. I thought, that this parameter should specify number of the packages which have exceeded valid boundary. But, for example statistics on one of queues:

SC> I have some more info on www.docum.org (FAQ page) :

SC> overlimits : Packet is not sended due to ceil or rate restrictions SC> So there was to much data in the class. But don't believe this too much. It SC> depends on how often the qdisc looked for packet. This counter is incremented SC> per unsucessfull DRR loop and it's possible that this happens more then once SC> per packet.
SC> Each dropped packet is overlimited.

Thus this parameter is really useless?

I have paid attention, that at speed of passinge of packages approximately 40 pps growth rate of this parameter about (near) 150000 pps.

--
Igor

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/