Skip to contentSkip to conversation

/proc interface OR graphing again ?

LARTC raptor 2 participants 2 messages Sep 9, 2002

lore
Share & tools
lore

raptor

author
#0 lore raw

hi,

I was searching in the arhives(for tcng-htb patch, still searching !!) and found a discussion about /proc interface for the ip-statistics/qos ..... is there any advance on this ?

Current practice is to install ipchains/iptables for counting the traffic and then graph the results with ip"something!" (computionaly intensive).... i probably will take the approach a separate station in promicious mode.. but availability of the counters in the /proc can streamline the things alot and give a quick way with simple scripts to handle those things...

And the idea to polling this statistics later with mrtg via net-snmp is good :")

thanx alot
[email protected]

PS. If anyone has the tcng-htb patch nearby, send it to me please :") thanx
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 5 lines · raptor

hi,

I was searching in the arhives(for tcng-htb patch, still searching !!) and found a discussion about /proc interface for the ip-statistics/qos ..... is there any advance on this ?

Not that I know ....

Quoted 8 lines

Current practice is to install ipchains/iptables for counting the traffic and then graph the results with ip"something!" (computionaly intensive).... i probably will take the approach a separate station in promicious mode.. but availability of the counters in the /proc can streamline the things alot and give a quick way with simple scripts to handle those things...

And the idea to polling this statistics later with mrtg via net-snmp is good :")

I have some scripts that uses the rrdtool (that's the graping part of mrtg) to create graphs based on the counters in tc. It also uses snmp to get the information so you can monitor on an other box. The scripts are ugly and I have some snmp-related problems, but it works for me. (see docum.org on the gui page for an exampe).

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/