Content based Routing
Just a quick question...
Is there a way to do content based routing (i.e. routing based on a TCP or UDP port) without using iptables, i.e. using the ip command?
Thanks
Andrew
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Nope.
You can use ipchains/iptables to fwmark a packet and then route based on fwmark (which needs to be supported by your kernel).
-Martin
: Just a quick question...
: Is there a way to do content based routing (i.e. routing based on a TCP : or UDP port) without using iptables, i.e. using the ip command? :
: Thanks
: Andrew
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Andrew J. Barbara
Just a quick question...
Is there a way to do content based routing (i.e. routing based on a TCP or UDP port) without using iptables, i.e. using the ip command?
It doesn't seem to be possible with just "ip", as neither "ip rule" nor "ip route" have "selectors" for transport-level port. But you have ipchains/iptables to mark packets and "ip" to route them based on the mark put on them.
Signature · 5 lines
Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Woody (Linux 2.4.19-pre6aa1) _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/