the range of HTB's prio
HTB and imq was used to control traffic.
AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k
$AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps
burst 2k prio 1
please tell me the range of "prio"
_________________________________________________________
Do You Yahoo!?
新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报!
http://cn.ent.yahoo.com/newsletter/index.html
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines
HTB and imq was used to control traffic.
AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k
$AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps
burst 2k prio 1please tell me the range of "prio"
1 to 8, 1 being the highest, 8 - the lowest.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 2 lines · Nickola Kolev
Quoted 1 line
please tell me the range of "prio"
1 to 8, 1 being the highest, 8 - the lowest.
0 is highest as I know ...
but I've also an question:
is there if difference if I have 2 chains and use prio 0 and 7 or prio 0 and 1 ?
- --
Regards,
Robert
- ----------------
Robert Penz
[email protected]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE9hv008tTsQqJDUBMRAuJIAJ90P6MUqvNw2V1sm9qLtPtncGXBnQCeNVFT 9DbmTUzKwv0/eMwgdg2n/lo=
=KhJa
-----END PGP SIGNATURE-----
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · hanhbnetfilter
HTB and imq was used to control traffic.
AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k
$AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps
burst 2k prio 1please tell me the range of "prio"
htb2 : 0-3
htb3 : 0-7
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Robert Penz
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 2 lines · Nickola Kolev
Quoted 1 line
please tell me the range of "prio"
Quoted 8 lines
Quoted 1 line
1 to 8, 1 being the highest, 8 - the lowest.
0 is highest as I know ...
but I've also an question:
is there if difference if I have 2 chains and use prio 0 and 7 or prio 0 and 1 ?
No
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
Aren't you talking about the depth of the classes?
Euh stupid me. Indeed.
Quoted 3 lines
Btw, several months ago I tried to hack my kernel (2.4.17 at that time) and changed the maxdepth to 7... Guess what happenned?
It went OOOPS'ing... Anyway. That was HTB2.
In htb3 you can change it if you want :
htb3.6_2.4.17.diff:+#define TC_HTB_MAXDEPTH 8
Quoted 1 line
So, now with htb3 I can use maximum depth of classes = 7, right?
Yep. Or change it in the source to an other value.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Earlier Freeswan also required patching of kernel. Recently, however, an rpm was released which makes it easy to install. many users may not have installed development libraries to do a recompile. Can someone who is good at it create and publish the rpms of kernel, iproute2 and tc patched for htb please?
Mohan
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Stef Coene
Sent: 17 September 2002 22:46
To: Robert Penz; [email protected]
Subject: Re: [LARTC] the range of HTB's prio
Quoted 6 lines · Robert Penz
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 2 lines · Nickola Kolev
Quoted 1 line
please tell me the range of "prio"
Quoted 8 lines
Quoted 1 line
1 to 8, 1 being the highest, 8 - the lowest.
0 is highest as I know ...
but I've also an question:
is there if difference if I have 2 chains and use prio 0 and 7 or prio 0 and 1 ?
No
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
Earlier Freeswan also required patching of kernel. Recently, however, an
rpm
Quoted 3 lines
was released which makes it easy to install. many users may not have installed development libraries to do a recompile. Can someone who is good at it create and publish the rpms of kernel, iproute2 and tc patched for
htb
Quoted 1 line
please?
For which distribution ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/