iptables -m limit
hy,
i want a iptables rule to match if a designated trafic is above x bps or
pps, i try
iptm="/usr/local/sbin/iptables -t mangle"
$iptm -A PREROUTING -i eth0 -m limit --limit 10000/sec $iptm -A PREROUTING -i eth0 -m limit ! --limit 10000/sec
the results are:
62992 16M all -- eth0 * 0.0.0.0/0
0.0.0.0/0 limit: avg 10000/sec burst 5
62993 16M all -- eth0 * 0.0.0.0/0
0.0.0.0/0 limit: avg 10000/sec burst 5
why the ! argument dont work???? and is accepted
C
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Ciprian Niculescu
hy,
i want a iptables rule to match if a designated trafic is above x bps or
pps, i tryiptm="/usr/local/sbin/iptables -t mangle"
$iptm -A PREROUTING -i eth0 -m limit --limit 10000/sec $iptm -A PREROUTING -i eth0 -m limit ! --limit 10000/sec
you don't have to use the ! if you go to the second rules, this is because you don't have match the first one, so you are over the limit. So you can do :
$iptm -A PREROUTING -i eth0 -m limit --limit 10000/sec -j MYTARGET iptm -A PREROUTING -i eth0 -j MYTARGET
Signature · 2 lines
Éric Leblond courriel : [email protected]