Skip to contentSkip to conversation

How to install HTB in kernel 2.4.7-10 ??

LARTC [email protected] 2 participants 2 messages Sep 17, 2002

lore
Share & tools
lore
#0 lore raw

Hi all,
How can I add htb to the linux kernel?
I download htb from www.docum.org , but I can't use that , I use patch to change Kernel, after change adjust when I use
tc add qdisc dev eth0 htb ...
RTNETLINK :answerd errore

I use kernel 2.4.7-10 ,If you have any idea I am waiting to listen,

---------------------------------------------
This message was sent using sharif web-based mail.
http://mehr.sharif.edu

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines · On Tuesday 17 September 2002 17:18, [email protected] wrote:

Hi all,
How can I add htb to the linux kernel?
I download htb from www.docum.org , but I can't use that , I use patch to change Kernel, after change adjust when I use
tc add qdisc dev eth0 htb ...
RTNETLINK :answerd errore

I use kernel 2.4.7-10 ,If you have any idea I am waiting to listen,

I think you mean you followed the link on www.docum.org to the htb home-page. On the same page is a patch for iproute2. You have to applied this patch to the iproute2 source and use the patched version of the tc command.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/