Problems compiling patched bridge-utils
Hello,
I've applied ``bridge-utils-0.9.5-ipmode-1.diff'' to be able to use my
shaper as bridge and don't lose the netfilter capabilities, the patch applies with no error messages, which makes me supose everything is working fine.
But when i try to recompile the bridge-utils utilities i get the
message transcript below:
esteban@inercia:~/devel/nexusbm/bridge-utils-0.9.5$ make make -C libbridge make[1]: Entering directory `/home/esteban/devel/bridge-shaper/bridge-utils-0.9.5/libbridge' gcc -Wall -g -c libbridge_devif.c libbridge_devif.c: In function `br_set_bridge_ip_mode': libbridge_devif.c:151: `BRCTL_SET_BRIDGE_IP_MODE' undeclared (first use in this function) libbridge_devif.c:151: (Each undeclared identifier is reported only once libbridge_devif.c:151: for each function it appears in.) make[1]: *** [libbridge_devif.o] Error 1 make[1]: Leaving directory `/home/esteban/devel/bridge-shaper/bridge-utils-0.9.5/libbridge' make: *** [libbridge/libbridge.a] Error 2
If I compile the bridge-utils with no patch applied (or with the lower
version diff applied) it compiles seamsly, and I can build a .deb with it too :-)
Any Clue?
Signature · 2 lines
Esteban A. Maringolo Buenos Aires, Argentina
Hello,
Quoted 8 lines · Esteban Maringolo
I've applied ``bridge-utils-0.9.5-ipmode-1.diff'' to be able to use my
shaper as bridge and don't lose the netfilter capabilities, the patch applies with no error messages, which makes me supose everything is working fine.But when i try to recompile the bridge-utils utilities i get the
message transcript below:
Quoted 8 lines
esteban@inercia:~/devel/nexusbm/bridge-utils-0.9.5$ make make -C libbridge make[1]: Entering directory `/home/esteban/devel/bridge-shaper/bridge-utils-0.9.5/libbridge' gcc -Wall -g -c libbridge_devif.c libbridge_devif.c: In function `br_set_bridge_ip_mode': libbridge_devif.c:151: `BRCTL_SET_BRIDGE_IP_MODE' undeclared (first use in this function)
May be you need 2.4.19 kernel in /usr/src/linux patched with
bridge-ipmode-2.4.19-2.diff, the user-space stuff is not enough.
Quoted 1 line
Any Clue?
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/