Skip to contentSkip to conversation

Simple (y/n) HTB question (Adi Nugroho)

LARTC Reza Alavi 2 participants 2 messages Sep 18, 2002 – Sep 19, 2002

lore
Share & tools
lore

Reza Alavi

author
#0 lore raw
Quoted 9 lines · Reza Alavi
Quoted 9 lines
                   [Linux Box]
                       /|\
                      / | \
                     /  |  \
                    /   |   \
                   A    B    C

A,C are both NATs.
B is a router.
Can I limit the bandwidth of every client simply

with

Quoted 6 lines
Quoted 2 lines

their IP addresses?(no matther if they are valid or NAT addresses?)

Yes, you are right.
(assuming that NAT are done by the linux box).

What I ment was if A and C are both Networks Which use NAT By themselfs and I want tp use Linux Box as only a traffic shaper for them (B is a network behind a router.)
Is it possible??

__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 5 lines · Reza Alavi

What I ment was if A and C are both Networks Which use NAT By themselfs and I want tp use Linux Box as only a traffic shaper for them (B is a network behind a router.)
Is it possible??

A and C are networks which are NAT-ed by router A and router B. Then if you shape for A and C, it will shape every box which is NAT-ed.

If B are router, and NOT doing NAT, then if you shape B, it is only match the router, and NOT imply boxes behind B. You have to shape them one-by-one.

Signature · 6 lines
Salam,

Adi Nugroho
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/