txqueuelen in ifconfig and tc
Hi there,
when reading "man ifconfig" it says the following:
" txqueuelen length
Set the length of the transmit queue of the device. It is useful to set this to small values for slower devices with a high latency (modem links, ISDN) to prevent fast bulk transfers from disturbing interactive traffic like telnet too much."
This seems to normally be 100 (packets i guess?)
Is this queue affected by tc or is it after all shaping?
I wonder this because im doing the Wondershaper ACK-priority thing, but people with a small windowsize is still affected very much by not recieving their ACK fast enough on my system.
Any ideas anyone?
Regards
Jonas
Quoted 1 line · Jonas Lindqvist
Is this queue affected by tc or is it after all shaping?
tx_queue_len provides default values for the queue size in all FIFO qdiscs, and an in unconfigured GRED (which acts just as a pfifo)),
In HTB, it sets the limit of the queue of class qdisc:0, so it affects traffic that doesn't get shaped.
In any case, any additional queuing after traffic control is at the discretion of the network interface driver, and not affected by tx_queue_len.
- Werner
Signature · 6 lines
_________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina [email protected] / /_http://www.almesberger.net/____________________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/