Skip to contentSkip to conversation

filtered gateway

LARTC [email protected] 2 participants 2 messages Oct 1, 2002

lore
Share & tools
lore
#0 lore raw

Hi
I am trying to configure my linux box with 2.4.18 as a gateway/firewall for
my public network. I don't know what rules I must use to accept incoming packets for other hosts with publics ips (like a router with filtering). Nat table is for masquerading only, where I configure these rules and how? topology:
ISP -> router -> linux box -> other hosts with public ip

thanks in advance.

-------------------------------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 7 lines · On Tuesday 01 October 2002 14:44, [email protected] wrote:

Hi
I am trying to configure my linux box with 2.4.18 as a gateway/firewall for
my public network. I don't know what rules I must use to accept incoming packets for other hosts with publics ips (like a router with filtering).
Nat table is for masquerading only, where I configure these rules and how? topology:
ISP -> router -> linux box -> other hosts with public ip

If the routing is ok and you enabled ip forwarding, it should work.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/