Skip to contentSkip to conversation

bandwidth manager using a linux bridge

LARTC Paul P. Pongco 2 participants 3 messages Oct 4, 2002 – Oct 5, 2002

lore
Share & tools
lore
#0 lore raw

Hello List,

Has anyone tried doing this using CBQ or HTB? I have seen implementations of firewall(using ipchains and iptables) using a linux bridge.
Thanks.

Signature · 9 lines
Cheers,

Paul P. Pongco					

  

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 6 lines · Paul P. Pongco

Hello List,

Has anyone tried doing this using CBQ or HTB? I have seen implementations of firewall(using ipchains and iptables) using a linux bridge.
Thanks.

It works very well. I used cbq with the u32 filter on a linux bridge. If you want to use iptables on a bridge, you will need some extra patches.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Paul P. Pongco

=>It works very well. I used cbq with the u32 filter on a linux bridge. =>If you want to use iptables on a bridge, you will need some extra patches. yes, confirmed. I just made it work using HTB on a linux bridge.

Cheers,

Paul P. Pongco
Mosaic Communications Inc.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/