Skip to contentSkip to conversation

how can i choose HTB's prio

LARTC hanhbnetfilter 2 participants 2 messages Oct 8, 2002

lore
Share & tools
lore
#0 lore raw

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 2
$AC 1:2 classid 1:12 htb rate 50kbps ceil 100kbps burst 2k
please tell me if i do not set prio, what is the default prio? low delay class can use prio 2,the others should use which prio?

_________________________________________________________
Do You Yahoo!?
"发短信赢手机,快来参加雅虎巨星秀!"
http://cn.ent.yahoo.com/star/midautumn/index.html
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines · hanhbnetfilter

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps

Quoted 8 lines

burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 2
$AC 1:2 classid 1:12 htb rate 50kbps ceil 100kbps burst 2k
please tell me if i do not set prio, what is the default prio? low delay class can use prio 2,the others should use which prio?

prio is only used when all classes are served and there is some bandwidth left. So if you have 20kbps in each class, you have 40kbs left. It will be given to the class with the lowest prio.
But there is more going on. You can find more info on the homepage of htb (
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#prio). If you have a class with the lowest prio and this class is not overlimit (it never wants to send more traffic then the rate), it will get very low delays. BUT if you send more traffic then the rate, the delays will increase.
I still have to figure out if you can use this to get low delays.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/