Skip to contentSkip to conversation

htb policy doesn't work help

LARTC 박 정은 1 participant 2 messages Oct 14, 2002

lore
Share & tools
lore

박 정은

author
#0 lore raw

Hi all~~

./tc qdisc del dev eth1 root
./tc qdisc add dev eth1 root handle 1: htb default 10
./tc class add dev eth1 parent 1: classid 1:1 htb rate 500kbps ceil 500kbps

./tc class add dev eth1 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps
./tc class add dev eth1 parent 1:2 classid 1:10 htb rate 150kbps ceil 500kbps prio 2
./tc class add dev eth1 parent 1:2 classid 1:11 htb rate 30kbps ceil 80kbps prio 2
./tc class add dev eth1 parent 1:1 classid 1:12 htb rate 200kbps ceil 300kbps prio 1
./tc qdisc add dev eth1 parent 1:10 handle 20: pfifo limit 5 ./tc qdisc add dev eth1 parent 1:11 handle 30: pfifo limit 5 ./tc qdisc add dev eth1 parent 1:12 handle 40: sfq perturb 10 ./tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 match ip sport 5000 0xffff flowid 1:12

i gave 5000port (it's 1:10) 200kbps and
21 port (it will be 1:10) 300kbps with traffic generator.

then, i gave 5000 port 300kpbs , and 21 port still 300kbps.. and I tried to checking the port's rate with iptraf..

Ofcourse port 5000 rate increased until 290kbps (10kbps less, but it's ok)

the problem is port 21's rate. It's rate should be 200kbps (because another port was not using).
but the port 21 's rate decreased until 132kbps ..!!

( 290+ 132 B2 where is rest 78 kbps??? )

I changed

./tc class add dev eth1 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps
./tc class add dev eth1 parent 1:2 class id 1:10 htb rate 150kbps ceil 500kbps prio 2

TO

./tc class add dev eth1 parent 1:1 classid 1:2 htb rate 230kbps ceil 500kbps
./tc class add dev eth1 parent 1:2 class id 1:10 htb rate 200kbps ceil 500kbps prio 2

it didn't work ..21 port's rate decrease below 140kbps..

what is the problem?? anybody knows???

Thanks in advance..

_________________________________________________________________
클릭하면 나만의 광고가 뜹니다. 검색 키워드 광고 문의
http://www.msn.co.kr/search/keywordshop

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#1 lore raw

i found some problems...

the rest 70kbps are used in 1:11 ..

but i didn't filtered 1:11 ... why 70kbps are used in 1:11?

when i added

./tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 patch ip sport 20 0xffff flowid 1:11

the port 20 's rate became about 70kbps..

So.. disappered 70kbps has been founded..

but why???

--above question.. some sentence error...
5000 port was 1:12 not 1:10

Sorry

Signature · 9 lines
Thanks in advance 

_________________________________________________________________
증권 정보 가장 빠르고 편하게 보실 수 있습니다. MSN 증권/투자 
http://www.msn.co.kr/stock/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/