Skip to contentSkip to conversation

controling nat'ed network

LARTC Ethy H. Brito 2 participants 2 messages Oct 15, 2002

lore
Share & tools
lore
#0 lore raw

Dear Guru

How can I control the output traffic of variuous clients with various classes when all the IP's will be singly nat'ed?

Client 1 - http Class (X Kbit)--> --+
Client 1 - pop3 Class (Y Kbit)--> --+
Client 2 http Class (X Kbit)--> --+----> master Class (Z Kbit)--->
NAT addr Client 2 - smtp Class (W Kbit)--> --+
Client 3 pop3 Class (Y Kbit)--> --+

Regards

Signature · 7 lines
Ethy H. Brito         /"\
InterNexo Ltda.       \ /  CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
+55 (12) 3941-6860     X   ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
S.J.Campos - Brasil   / \ 
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 4 lines · Ethy H. Brito

Dear Guru

How can I control the output traffic of variuous clients with various classes when all the IP's will be singly nat'ed?

Mark the packets when they enter the box and use that mark to filter the packets when they leave the box. The mark will survivie the natting of the packets.

Quoted 5 lines

Client 1 - http Class (X Kbit)--> --+
Client 1 - pop3 Class (Y Kbit)--> --+
Client 2 http Class (X Kbit)--> --+----> master Class (Z Kbit)--->
NAT addr Client 2 - smtp Class (W Kbit)--> --+
Client 3 pop3 Class (Y Kbit)--> --+

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/