Skip to contentSkip to conversation

iptables + pcanywhere

LARTC Marco Hainaut 2 participants 2 messages Oct 16, 2002

lore
Share & tools
lore
#0 lore raw

hello ,

I'm newbee with iptables and firewalling and my question is :

How can I do to authorise access to a workstation in a local network with pcanywhere from the outside trough my "routing-firewalling' red hat 8 box newly installed from scratch ?

eth0 = external if ( 212.145.X.X )
eth1 = local if (192.168.0.2)
used ports : 5631 (tcp) & 5632 (udp)

Is there somebody can help me to write the correct script to make it working ?

regards,

Marco Hainaut

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 16 lines · Marco Hainaut

hello ,

I'm newbee with iptables and firewalling and my question is :

How can I do to authorise access to a workstation in a local network with pcanywhere from the outside trough my "routing-firewalling' red hat 8 box newly installed from scratch ?

eth0 = external if ( 212.145.X.X )
eth1 = local if (192.168.0.2)
used ports : 5631 (tcp) & 5632 (udp)

Is there somebody can help me to write the correct script to make it working ?

Quoted 8 lines

regards,

Marco Hainaut

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Marco,

suppose the IP address of your PC/Anywhere workstation is $PCANY.
Then you need at least the following rules:

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 5631 -j DNAT --to-destination $PCANY
iptables -t nat -A PREROUTING -i eth0 -p udp --dport 5632 -j DNAT --to-destination $PCANY

iptables -t filter -A FORWARD -i eth0 -o eth1 -p tcp -m state --dport 5631 --syn --state NEW -j ACCEPT
iptables -t filter -A FORWARD -i eth0 -o eth1 -p udp --dport 5632 -j ACCEPT iptables -t filter -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT

# If you need to nat all outgoing trafic...
iptables -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j MASQUERADE

Regards,

Stephane.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/