Skip to contentSkip to conversation

How save rules and routes ?

LARTC fabio 3 participants 3 messages Oct 16, 2002 – Oct 17, 2002

lore
Share & tools
lore
#1 lore raw

Fabien,

To my knowledge, there exists no such tool. You'll need to do the latter--write a script to put the rules and routes into place.

-Martin

: I search if it possible to save rules an routes I configured. ( Or I : must write a script to launch ip route and rule command at each reboot ) : Fabien
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:

Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to fabio

Launch a script ... but on the bright side you can save tables.

Quoted 9 lines · fabio

Dear All
I search if it possible to save rules an routes I configured. ( Or I must write a script to launch ip route and rule command at each reboot ) Fabien

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/