Skip to contentSkip to conversation

help, a children can not borrow from a parent?

LARTC [email protected] 3 participants 4 messages Oct 23, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 10 lines
Quoted 10 lines

WHEN i send packets from 10.1.1.1 at rate frome 12mbit to 50mbit BY
using
SMARTBIT 600, the rate of class 10:100 is always 12Mbits.

Quoted 2 lines

I suppose it's the SMATRBIT 600 that says it sends 12bits. WHAT if you change 12mbit to 15mbit. WHAT if you send more then

20Mbit.

Quoted 7 lines
Quoted 7 lines

WHAT

Quoted 3 lines

if you change 12mbit to a lower value (1mbit). CAN you can do that and post the results?
I don't think there is an error in your setup.

Quoted 7 lines
Quoted 6 lines

WHEN i change 12mbit to 15mbit and send packets at rate 15mbit,20mbit,30mbit,50mbit, the rate of class 10:100 is always 15mbits. WHEN i change 12mbit to 30mbit and send packets at rate 30mbit,40mbit,50mbit, the rate of class 10:100 is always 30mbits. WHEN i change 12mbit to a lower value (1mbit) and send packets at rate 1mbit,2mbit,10mbit,20mbit, the rate of class 10:100 is always 1mbits.

The ceil parameter always worked for me. What version of tc/htb/kernel

are

Quoted 1 line

you using?

TC from htb3.6-020525.zip
kernel 2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff ds9-htb3-2.2.21-1.diff
from http://www.ssi.bg/~ja/ds9/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines

TC from htb3.6-020525.zip
kernel 2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff ds9-htb3-2.2.21-1.diff
from http://www.ssi.bg/~ja/ds9/

HTB 3.6 + kernel 2.4.19 are working for me. You are using a backport of htb from 2.4 to 2.2. Maybe they made an error when they backported htb. Check it out with the maintainer (not Devik, but the one who created the files you us).

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw

RE: Re: Re: Re: [LARTC] help, a children can not borrow from a

In reply to [email protected]

Hello,

Quoted 8 lines · On Wed, 23 Oct 2002 [email protected] wrote:
Quoted 1 line

The ceil parameter always worked for me. What version of tc/htb/kernel

are

Quoted 1 line

you using?

TC from htb3.6-020525.zip
kernel 2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff ds9-htb3-2.2.21-1.diff
from http://www.ssi.bg/~ja/ds9/

	I just upgraded to HTB 3.7 from 2.4.20pre11: ds9-htb3-2.2.21-2.diff

	I can't comment the HTB behavior, my tests with HTB were

very simple. In production I'm using this backport only for CBQ, U32, SFQ, Ingress, policers. I have never observed deviations from the 2.4 behavior. It would be good if you can compare the same settings on 2.4.20pre.

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw

RE: Re: Re: Re: [LARTC] help, a children can not borrow from a

In reply to [email protected]

Hello,

On Wed, 23 Oct 2002 [email protected] wrote:

Ops, is that correct?:

Quoted 1 line

ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT

it should be

ipchains -A fw -s 0.0.0.0/0 -d 0.0.0.0/0 -j ACCEPT

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/