Skip to contentSkip to conversation

NETWORK ROUTES

LARTC Ángel Carrasco 3 participants 6 messages Oct 24, 2002 – Oct 28, 2002

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a debian server with 4 network cards:
The first card is used to connect to public network and this network connects with a big router.
The Second, third and fourth cards are used by other networks. The first card used a dinamic route with the big router.
The other cards used a static route with a little router.
All runs good but my problem is when I try to use the IP of my first card in my internals networks
doesn't work because, all information doesn't go by internals networks, it goes by the big network.
Could you help me, please?

Thank you very much,

Ángel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 12 lines · Ángel Carrasco

Hi all,

I have a debian server with 4 network cards:
The first card is used to connect to public network and this network connects with a big router.
The Second, third and fourth cards are used by other networks. The first card used a dinamic route with the big router.
The other cards used a static route with a little router.
All runs good but my problem is when I try to use the IP of my first card in my internals networks
doesn't work because, all information doesn't go by internals networks, it goes by the big network.

Can you clarify this a bit? Routes, ip-adresses, what you tried, what's working, what's not working, ...

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Ángel Carrasco

Ok:

My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1. My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1 My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1 My public network is:213.250.143.240/28 and his IP is: 213.250.143.242.

The public router is 213.250.143.241 (and only works with the range 213.250.143.240/28)
The office router is 172.16.16.254 (and only works with the range 172.16.16.0/24)

The static default route is 172.16.16.254

This is my route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface

213.250.143.240 0.0.0.0         255.255.255.240 U     0      0        0 eth0
172.16.4.0      0.0.0.0         255.255.255.0   U     0      0        0 eth1
172.16.16.0     0.0.0.0         255.255.255.0   U     0      0        0 eth3
172.16.8.0      0.0.0.0         255.255.255.0   U     0      0        0 eth2
0.0.0.0         172.16.16.254   0.0.0.0         UG    0      0        0 eth3

And my dinamic route to using the public network is:
ip rule add from 213.250.143.242 table publica
ip route add from default via 213.250.143.241 dev eth0 table publica ip route flush cache

And the problem is when I try to use 213.250.143.242 in my internals networks doesnt run because the information goes by 213.250.143.241 and not in the normal routes.

Can you help me, please?

----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Ángel Carrasco" <[email protected]>; <[email protected]>
Sent: Thursday, October 24, 2002 1:45 PM
Subject: Re: [LARTC] NETWORK ROUTES

Quoted 12 lines · Ángel Carrasco

Hi all,

I have a debian server with 4 network cards:
The first card is used to connect to public network and this network connects with a big router.
The Second, third and fourth cards are used by other networks. The first card used a dinamic route with the big router.
The other cards used a static route with a little router.
All runs good but my problem is when I try to use the IP of my first card in my internals networks
doesn't work because, all information doesn't go by internals networks, it goes by the big network.

Can you clarify this a bit? Routes, ip-adresses, what you tried, what's working, what's not working, ...

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Ángel Carrasco
Quoted 31 lines · Ángel Carrasco

Ok:

My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1. My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1 My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1 My public network is:213.250.143.240/28 and his IP is: 213.250.143.242.

The public router is 213.250.143.241 (and only works with the range 213.250.143.240/28)
The office router is 172.16.16.254 (and only works with the range 172.16.16.0/24)

The static default route is 172.16.16.254

This is my route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
213.250.143.240 0.0.0.0 255.255.255.240 U 0 0 0
eth0 172.16.4.0 0.0.0.0 255.255.255.0 U 0 0
0 eth1 172.16.16.0 0.0.0.0 255.255.255.0 U 0 0
0 eth3 172.16.8.0 0.0.0.0 255.255.255.0 U 0 0
0 eth2 0.0.0.0 172.16.16.254 0.0.0.0 UG 0 0
0 eth3

And my dinamic route to using the public network is:
ip rule add from 213.250.143.242 table publica
ip route add from default via 213.250.143.241 dev eth0 table publica ip route flush cache

Quoted 3 lines

And the problem is when I try to use 213.250.143.242 in my internals networks doesnt run because the information goes by 213.250.143.241 and not in the normal routes.

I suppose you pinged from on of your internal hosts to 213.250.143.242 ?? 213.250.143.242 is local, so no routing rule will route the packets to somewhere else.

Quoted 2 lines

Can you help me, please?

I'm not a rouing specialist, but shouldn't your default gateway be 213.250.143.24 ??
And I suppose you already enabled ip-forwarding?
Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to Ángel Carrasco

My little route only manage the range 172.16.16.0/24 and my public route only manages the range 213.250.143.240/28. I cannot add new rules because these routers are administer by other company and this company cannot colaborate me.

Please can you help me, please?

Ángel

-----Mensaje original-----
De: [email protected] [mailto:[email protected]]En nombre de Stef Coene
Enviado el: jueves, 24 de octubre de 2002 21:58
Para: Ángel Carrasco; [email protected]
Asunto: Re: [LARTC] NETWORK ROUTES

Quoted 25 lines · Ángel Carrasco

Ok:

My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1. My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1 My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1 My public network is:213.250.143.240/28 and his IP is: 213.250.143.242.

The public router is 213.250.143.241 (and only works with the range 213.250.143.240/28)
The office router is 172.16.16.254 (and only works with the range 172.16.16.0/24)

The static default route is 172.16.16.254

This is my route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
213.250.143.240 0.0.0.0 255.255.255.240 U 0 0 0
eth0 172.16.4.0 0.0.0.0 255.255.255.0 U 0 0
0 eth1 172.16.16.0 0.0.0.0 255.255.255.0 U 0 0
0 eth3 172.16.8.0 0.0.0.0 255.255.255.0 U 0 0
0 eth2 0.0.0.0 172.16.16.254 0.0.0.0 UG 0 0
0 eth3

Quoted 8 lines

And my dinamic route to using the public network is:
ip rule add from 213.250.143.242 table publica
ip route add from default via 213.250.143.241 dev eth0 table publica ip route flush cache

And the problem is when I try to use 213.250.143.242 in my internals networks doesnt run because the information goes by 213.250.143.241 and

not

Quoted 1 line

in the normal routes.

I suppose you pinged from on of your internal hosts to 213.250.143.242 ?? 213.250.143.242 is local, so no routing rule will route the packets to somewhere else.

Quoted 2 lines

Can you help me, please?

I'm not a rouing specialist, but shouldn't your default gateway be 213.250.143.24 ??
And I suppose you already enabled ip-forwarding?
Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#5 lore raw
In reply to Ángel Carrasco

햚gel,

I agree with Stef's remark--it looks like your default route should be 213.250.143.241, but we don't know exactly why you chose to set up a default route to 172.16.16.254 (your internal router).

Please tell us what networks are behind 172.16.16.254.

I suspect that you may have a handful of networks behind 172.16.16.254, all of which can be entered as static routes on your Debian box. Then you can set the default route on this machine to 213.250.143.241.

Let's assume that you have the network 172.16.0.0/16 reachable behind your router 172.16.16.254. You should be able to do this:

# ip route add 172.16.0.0/16 via 172.16.16.254
# ip route change default via 213.250.143.241

In that case, you will no longer need "ip rule" at all.

-Martin

: My little route only manage the range 172.16.16.0/24 and my public route : only manages the range 213.250.143.240/28. I cannot add new rules because : these routers are administer by other company and this company cannot : colaborate me.
:
: Please can you help me, please?
:
:
: 햚gel
:
: -----Mensaje original-----
: De: [email protected] [mailto:[email protected]]En : nombre de Stef Coene
: Enviado el: jueves, 24 de octubre de 2002 21:58
: Para: 햚gel Carrasco; [email protected]
: Asunto: Re: [LARTC] NETWORK ROUTES
:
:
: On Thursday 24 October 2002 14:29, 햚gel Carrasco wrote:
: > Ok:
: >
: > My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1. : > My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1 : > My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1 : > My public network is:213.250.143.240/28 and his IP is: 213.250.143.242. : >
: > The public router is 213.250.143.241 (and only works with the range : > 213.250.143.240/28)
: > The office router is 172.16.16.254 (and only works with the range : > 172.16.16.0/24)
: >
: > The static default route is 172.16.16.254
: >
: > This is my route -n
: > Kernel IP routing table
: > Destination Gateway Genmask Flags Metric Ref Use
: > Iface
: > 213.250.143.240 0.0.0.0 255.255.255.240 U 0 0 0
: > eth0 172.16.4.0 0.0.0.0 255.255.255.0 U 0 0
: > 0 eth1 172.16.16.0 0.0.0.0 255.255.255.0 U 0 0
: > 0 eth3 172.16.8.0 0.0.0.0 255.255.255.0 U 0 0
: > 0 eth2 0.0.0.0 172.16.16.254 0.0.0.0 UG 0 0
: > 0 eth3
: >
: > And my dinamic route to using the public network is:
: > ip rule add from 213.250.143.242 table publica
: > ip route add from default via 213.250.143.241 dev eth0 table publica : > ip route flush cache
: >
: >
: > And the problem is when I try to use 213.250.143.242 in my internals : > networks doesnt run because the information goes by 213.250.143.241 and : not
: > in the normal routes.
: I suppose you pinged from on of your internal hosts to 213.250.143.242 ?? : 213.250.143.242 is local, so no routing rule will route the packets to : somewhere else.
:
: >
: > Can you help me, please?
: I'm not a rouing specialist, but shouldn't your default gateway be : 213.250.143.24 ??
: And I suppose you already enabled ip-forwarding?
: Stef
:
: --
:
: [email protected]
: "Using Linux as bandwidth manager"
: http://www.docum.org/
: #lartc @ irc.oftc.net
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:

Signature · 7 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/