Skip to contentSkip to conversation

Fair Bandwidth sharing with HTB and EFSQ

LARTC Kerschbaumer Samuel 2 participants 2 messages Oct 24, 2002

lore
Share & tools
lore
#0 lore raw

I downloaded the HTB and ESFQ packages and installled the patched kernel and tools.

Now can someone give me an example how to configure my system so that the 512Kbit are fairly divided for each computer ? Assume that eth0 is the interface on the WAN side and eth1 on the LAN side.

Thanks

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines · Kerschbaumer Samuel

I downloaded the HTB and ESFQ packages and installled the patched kernel and tools.

Now can someone give me an example how to configure my system so that the 512Kbit are fairly divided for each computer ? Assume that eth0 is the interface on the WAN side and eth1 on the LAN side.

Someone else can give actual code I'm sure, but you basically want:

Add htb class to ethx, speed 512kbit.
Add esfq to htb class above.
Add filter to make all relevant traffic go through esfq qdisc (above).

Signature · 8 lines
Michael T. Babcock
C.T.O., FibreSpeed Ltd.
http://www.fibrespeed.net/~mbabcock


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/