ip addr add 1.1.1.1/24 brd + dev eth3 scope link table my_table
I want to do something like this:
ip addr add 1.1.1.1/24 brd + dev eth3 scope link table my_table
so that
1. Direct route 1.1.1.1/24 should go to table my_table.
2. Address 1.1.1.1 should be recognizes as a local only for packets received on dev eth3.
Any suggestions ?
Thanks
- Jacob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] ip addr add 1.1.1.1/24 brd + dev eth3 scope link table
Jacob,
Could you use the following instead:
# iptables -t nat -A PREROUTING -i eth3 -d 1.1.1.1/24 -j DNAT \
Quoted 1 line
--to-destination ip.ad.dr.es
It circumvents the problem you are trying to avoid, I think.
-Martin
: I want to do something like this:
:
: ip addr add 1.1.1.1/24 brd + dev eth3 scope link table my_table
:
: so that
: 1. Direct route 1.1.1.1/24 should go to table my_table.
: 2. Address 1.1.1.1 should be recognizes as a local only for packets received on dev eth3. :
: Any suggestions ?
: Thanks
: - Jacob
:
:
:
:
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Signature · 7 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/