Skip to contentSkip to conversation

failed shaping outgoing traffic

LARTC Kristiadi Himawan 1 participant 1 message Oct 28, 2002

lore
Share & tools
lore
#0 lore raw

I used cbq in my gateway,
eth1 connecting to internet, and eth0 to local network, to poll traffic in/out using ipchains accounting and mrtg. Now i have succeed shaping incoming traffic to my local network with my configuration using cbq on eth0, but when i try to shaping outgoing traffic from my local network i see it didn't workout from my mrtg. RULE.111.1.2 (for incoming)
RULE.111.1.2, (for outgoing)
Any body have an idea to solve this ?

Best regards,

Quoted 1 line

--<Kristiadi Himawan>--<

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/