2-NIC DMZ?
Hi all,
I have two static IPs from my ISP. I would like one of these IPs to be directed to my desktop box all the time, and the other to be directed to a DHCP-served NAT network. I've nearly gotten it working using iptables and iproute2, but one problem is that i would like packets coming from my desktop box via the firewall to be printed with my desktop's external IP. They are currently being seen as from the NAT-hosted IP, which is the main IP address of the firewall box's external NIC. My setup looks like this:
DSL Bridge -> [eth0] Firewall [eth1] -> 8-port-switch -> static desktop
\-> (NAT cloud)
is it possible to send packets from the firewall looking like they came from a different external IP address based on which internal IP they were routed from? it seems to me it really should be possible to do ... just, how?
Thanks,
-- Justin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
AFAIK, you can do all of this by using FIAIF:
which is a VERY nice and highly customizable script for setting up an iptables based firewall. It has traffic shaping too.
Regards
Lars Munch
Quoted 17 lines · Justin Richer
Hi all,
I have two static IPs from my ISP. I would like one of these IPs to be directed to my desktop box all the time, and the other to be directed to a DHCP-served NAT network. I've nearly gotten it working using iptables and iproute2, but one problem is that i would like packets coming from my desktop box via the firewall to be printed with my desktop's external IP. They are currently being seen as from the NAT-hosted IP, which is the main IP address of the firewall box's external NIC. My setup looks like this:
DSL Bridge -> [eth0] Firewall [eth1] -> 8-port-switch -> static desktop
\-> (NAT cloud)is it possible to send packets from the firewall looking like they came from a different external IP address based on which internal IP they were routed from? it seems to me it really should be possible to do ... just, how?
Quoted 6 lines
Thanks,
-- Justin_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
AFAIK, you can do all of this by using FIAIF:
which is a VERY nice and highly customizable script for setting up an iptables based firewall. It has traffic shaping too.
Regards
Lars Munch
Quoted 17 lines · Justin Richer
Hi all,
I have two static IPs from my ISP. I would like one of these IPs to be directed to my desktop box all the time, and the other to be directed to a DHCP-served NAT network. I've nearly gotten it working using iptables and iproute2, but one problem is that i would like packets coming from my desktop box via the firewall to be printed with my desktop's external IP. They are currently being seen as from the NAT-hosted IP, which is the main IP address of the firewall box's external NIC. My setup looks like this:
DSL Bridge -> [eth0] Firewall [eth1] -> 8-port-switch -> static desktop
\-> (NAT cloud)is it possible to send packets from the firewall looking like they came from a different external IP address based on which internal IP they were routed from? it seems to me it really should be possible to do ... just, how?
Quoted 6 lines
Thanks,
-- Justin_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
*VERY* easy. No routing rules involved, just IPTABLES:
For your workstation:
# iptables -t nat -A POSTROUTING -s 192.168.0.5 (your workstation statis IP) -o eth0 -j SNAT --to PUBLIC_IP_1 Then, for everyone else: # iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to PUBLIC_IP_2
-Ken
-----Original Message-----
From: Justin Richer [mailto:[email protected]]
Sent: Monday, October 28, 2002 11:28 AM
To: [email protected]
Subject: [LARTC] 2-NIC DMZ?
Hi all,
I have two static IPs from my ISP. I would like one of these IPs to be directed to my desktop box all the time, and the other to be directed to a DHCP-served NAT network. I've nearly gotten it working using iptables and iproute2, but one problem is that i would like packets coming from my desktop box via the firewall to be printed with my desktop's external IP. They are currently being seen as from the NAT-hosted IP, which is the main IP address of the firewall box's external NIC. My setup looks like this:
DSL Bridge -> [eth0] Firewall [eth1] -> 8-port-switch -> static desktop
\-> (NAT cloud)
is it possible to send packets from the firewall looking like they came from a different external IP address based on which internal IP they were routed from? it seems to me it really should be possible to do ... just, how?
Thanks,
-- Justin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
*smacks forehead*
I'm an idiot. I actually had all of the rules correct, including those two you listed. However, I had them in the opposite order from what you listed. This was a problem, since both my NAT network and my workstation IP are all on the 192.168.0.x network. Therefore, since the first rule matched packets coming from my desktop as coming from the "internal" network, that rule executed and it went on its merry way. Seeing your post made me re-examine my script more closely, and that showed the problem. Thank you!
-- Justin
----- Original Message -----
From: "Ken Price" <[email protected]>
To: "'Justin Richer'" <[email protected]>; <[email protected]>
Sent: Monday, October 28, 2002 5:05 PM
Subject: RE: [LARTC] 2-NIC DMZ?
Quoted 4 lines
*VERY* easy. No routing rules involved, just IPTABLES:
For your workstation:
# iptables -t nat -A POSTROUTING -s 192.168.0.5 (your workstation statis
IP)
Quoted 25 lines
-o eth0 -j SNAT --to
PUBLIC_IP_1
Then, for everyone else:# iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to PUBLIC_IP_2-Ken
-----Original Message-----
From: Justin Richer [mailto:[email protected]]
Sent: Monday, October 28, 2002 11:28 AM
To: [email protected]
Subject: [LARTC] 2-NIC DMZ?Hi all,
I have two static IPs from my ISP. I would like one of these IPs to be directed to my desktop box all the time, and the other to be directed to a DHCP-served NAT network. I've nearly gotten it working using iptables and iproute2, but one problem is that i would like packets coming from my desktop box via the firewall to be printed with my desktop's external IP. They are currently being seen as from the NAT-hosted IP, which is the main IP address of the firewall box's external NIC. My setup looks like this:
Quoted 4 lines
DSL Bridge -> [eth0] Firewall [eth1] -> 8-port-switch -> static desktop
\-> (NAT cloud)is it possible to send packets from the firewall looking like they came
from
Quoted 1 line
a different external IP address based on which internal IP they were
routed
Quoted 9 lines
from? it seems to me it really should be possible to do ... just, how?
Thanks,
-- Justin_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/