Skip to contentSkip to conversation

tc bandwidth management doesn't work on one-armed router

LARTC [email protected] 1 participant 1 message Oct 30, 2002

lore
Share & tools
lore
#0 lore raw

hello everyone,

when i am using two NICs in my machine, one connected to the testclient and the other to the LAN/internet, everything is working fine about limiting throughput speed using tc. i have the upstream controlled on the one interface and the downstream on the other.

basically, i have a script that sets up a root class, three different classes, applies the queue management rules (using SFQ and the option "bounded"), and filters packets based on fwmark. for testing i simply mark everything using iptables.

now the problem:

i need to do bandwidth control on a single-arm router using only one NIC.

the script remains the same except half of the statements omitted, since there is only one interface left.

when i do tc -s qdisc, i can watch packets going through the right class, but the rate does not take effect. traffic gets as fast as the contacted server can send (approx. 3MByte/s).

actually, i am surprised by this behaviour, that i don't understand at all. :)

can anyone help me finding a reason for / explanation of this effect? any hint, advice or solution is welcome.

thanx, ulric

ulrich schwarz, computing center, university of ulm, germany
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/