tc bandwidth management doesn't work on one-armed router [scripts]
hello everyone,
as requested, i supply the script that is working two-armed and does not work one-armed:
------------------------------------------------------------------------------
tc qdisc del dev eth0 root handle 10:
tc qdisc add dev eth0 root handle 10: cbq bandwidth 100Mbit avpkt 1000
tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 100Mbit rate 100mbit allot 1514 maxburst 20 avpkt 1000 prio 1
tc class add dev eth0 parent 10:1 classid 10:200 cbq bandwidth 100Mbit rate 128kbit allot 1514 maxburst 20 avpkt 1000 prio 1 bounded
tc qdisc add dev eth0 parent 10:200 sfq quantum 1514b perturb 15
tc filter add dev eth0 protocol ip parent 10: prio 1 handle 2 fw classid 10:200
iptables -A OUTPUT -t mangle -p tcp --dport 22 -j TOS --set-tos Minimize-Delay iptables -A OUTPUT -t mangle -p tcp --dport 80 -j TOS --set-tos Maximize-Throughput iptables -A OUTPUT -t mangle -p tcp --dport 443 -j TOS --set-tos Maximize-Throughput
iptables -t mangle -A FORWARD -j MARK --set-mark 2
------------------------------------------------------------------------------
this may be also interesting:
# tc -d qdisc qdisc sfq 8002: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 15sec qdisc cbq 10: dev eth0 rate 100Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b level 2 ewma 5 avpkt 1000b maxidle 1us
# tc -s qdisc qdisc sfq 8002: dev eth0 quantum 1514b perturb 15sec Sent 723861 bytes 13389 pkts (dropped 0, overlimits 0)
qdisc cbq 10: dev eth0 rate 100Mbit (bounded,isolated) prio no-transmit Sent 724767 bytes 13402 pkts (dropped 0, overlimits 11767)
borrowed 0 overactions 0 avgidle 62 undertime 0
i hope anybody can help me,
greetings
ulric
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/