Skip to contentSkip to conversation

fw mark torouble

LARTC Alexey Sheshka 3 participants 4 messages Nov 1, 2002

lore
Share & tools
lore
#0 lore raw

Hi!

I have been setup next configuration :

$TC qdisc add dev $DEVB root handle 1: htb default 30

$TC class add dev $DEVB parent 1: classid 1:1 htb rate 100mbit ceil 100mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:10 htb rate 1mbit ceil 1mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:30 htb rate 2mbit ceil 100mbit burst 15k

$TC qdisc add dev $DEVB parent 1:10 sfq perturb 10 $TC qdisc add dev $DEVB parent 1:30 sfq perturb 10

$iptables -A OUTPUT -t mangle -p tcp -d 192.168.15.129 -j MARK --set-mark 10 $tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw classid 1:10

and all works fine, only 1 mbit goes to 192.168.15.129, but if I do

$iptables -A OUTPUT -t mangle -p tcp -s 0/0 --sport 80 -d 192.168.15.129 -j MARK --set-mark 10 $tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw classid 1:10

HTTP to 192.168.15.129 goes full 100 Mbit .

Kernel 2.4.19 ; htb patch, tc binnary from HTB homepage

Where my mistake ?
Thanks.

Signature · 7 lines
Sheshka Aleksey
Senior Security Administrator

PGP key : http://pgp.dtype.org:11371/pks/lookup?op=get&search=0x0BE90515
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 19 lines · Alexey Sheshka

Hi!

I have been setup next configuration :

$TC qdisc add dev $DEVB root handle 1: htb default 30

$TC class add dev $DEVB parent 1: classid 1:1 htb rate 100mbit ceil 100mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:10 htb rate 1mbit ceil 1mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:30 htb rate 2mbit ceil 100mbit burst 15k

$TC qdisc add dev $DEVB parent 1:10 sfq perturb 10 $TC qdisc add dev $DEVB parent 1:30 sfq perturb 10

$iptables -A OUTPUT -t mangle -p tcp -d 192.168.15.129 -j MARK --set-mark 10
$tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw classid 1:10

Quoted 8 lines

and all works fine, only 1 mbit goes to 192.168.15.129, but if I do

$iptables -A OUTPUT -t mangle -p tcp -s 0/0 --sport 80 -d 192.168.15.129 -j MARK --set-mark 10
$tc filter add dev $DEVB protocol ip parent 1:0 prio
1 handle 10 fw classid 1:10

HTTP to 192.168.15.129 goes full 100 Mbit .

Can you check the iptables counters so you are sure that the packets get marked? Maybe a tcpdump can give you more information.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Alexey Sheshka
Quoted 22 lines · On Fri, 1 Nov 2002 11:54:08 +0100 Stef Coene <[email protected]> wrote:
Quoted 21 lines · Alexey Sheshka

Hi!

I have been setup next configuration

$TC qdisc add dev $DEVB root handle 1: htb default 30

$TC class add dev $DEVB parent 1: classid 1:1 htb rate 100mbit ceil 100mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:10 htb rate 1mbit ceil 1mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:30 htb rate 2mbit ceil 100mbit burst 15k

$TC qdisc add dev $DEVB parent 1:10 sfq perturb 10 $TC qdisc add dev $DEVB parent 1:30 sfq perturb 10

$iptables -A OUTPUT -t mangle -p tcp -d 192.168.15.129 -j MARK --set-mark 10
$tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw classid 1:10

and all works fine, only 1 mbit goes to 192.168.15.129, but if I do

Quoted 8 lines
Quoted 6 lines

$iptables -A OUTPUT -t mangle -p tcp -s 0/0 --sport 80 -d 192.168.15.129 -j MARK --set-mark 10
$tc filter add dev $DEVB protocol ip parent 1:0 prio
1 handle 10 fw classid 1:10

HTTP to 192.168.15.129 goes full 100 Mbit .

Can you check the iptables counters so you are sure that the packets get marked? Maybe a tcpdump can give you more information.

Thanks . Problem solved. Popular mp3 server use pot 8001 and users bypass my rules.

Quoted 9 lines

Stef

Signature · 4 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
Signature · 4 lines
PGP key : http://pgp.dtype.org:11371/pks/lookup?op=get&search=0x0BE90515
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Alexey Sheshka
Quoted 4 lines · Alexey Sheshka

Hi!

$iptables -A OUTPUT -t mangle -p tcp -s 0/0 --sport 80 -d 192.168.15.129 -j MARK --set-mark 10

This will only mark packets from your HTTP server (*localhost*) going to 192.168.15.129 (the client) . Is that what you mean?

Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
(012) 341-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
Sao Jose dos Campos / \

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/