Skip to contentSkip to conversation

Could someone help me understand htb queuening

LARTC Alexander Trotsai 1 participant 1 message Nov 7, 2002

lore
Share & tools
lore
#0 lore raw

Hi anyone

I try to use htb and got some strange situation My hbt config is root htb with default to 999 class Then I make 2 classes 999 and 998
And make many many (near 60) leafs attached to 998

                  root
                  !  !
                999  998 ---...---> many leafs

root attached to ethernet dotQ subinterface
999 make rate where high (50Mbit) but according to tc -s class show dev <intf> traffic at this class extremally small (near 9,6Kbit) so any other traffic going throw 998 class
On 998 class I make rate X Mbit's (without.same ceil) Than I make many many leafs with it's own rate/ceil Summary of rate (and ceil) is biggest then X

I think that I have 3 level of queue at my config High level - root htb (unused because speed too high) Second level - queue at classes 998 and 999 And next level - queue and any leaf

But I can't see queuning at class 998 even if traffic more then X Mbits
I think I got priority queue (I set prio at nex level classes) but nothing I got and at interface I got high speed that X Mbits
Why? Could I do something to get such config?

M-m-m and some another information. To any leaf I connect sfq qdisc. To 998 I doesn't connect anything. May be I need to connect prio queuening discipline?

Also I want to ask another question
If I make filter like 1:1 to parent 1: and than make two another filters 1:2 and 1:3 with parent 1:1 is I got logical and between 1:1 and 1:2/1:3?

Signature · 6 lines
Best regard, Aleksander Trotsai aka MAGE-RIPE aka MAGE-UANIC
My PGP key at ftp://blackhole.adamant.ua/pgp/trotsai.key[.asc]
Big trouble - Someone else stole your IP address, call the Internet detectives!
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/