Access to TC from linux kernel
Hi!,
I am a newbie to LARTC. I have a linux kernel module which inspects packets and marks the packets using Netfilter.
I am aware that I can implement traffic shaping on the marked packets using tc from the user land.
I would like to know if I can perform traffic shaping on the marked packets from within the linux kernel. Did anyone do something similar to this before?
Thank You,
BRK
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · lists brk
Hi!,
I am a newbie to LARTC. I have a linux kernel module which inspects packets and marks the packets using Netfilter.
Quoted 6 lines
I am aware that I can implement traffic shaping on the marked packets using tc from the user land.
I would like to know if I can perform traffic shaping on the marked packets from within the linux kernel. Did anyone do something similar to this before?
You need the fw filter. This filter can match packets based on the kernel mark.
tc filter add dev eth0 parent 1: protocol ip prio 3 handle 1 fw classid 10:1 This filter will match all packets with mark 1 and put them in class 10:1
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/