Skip to contentSkip to conversation

zebra: ospf problem

LARTC nitin panjwani 2 participants 2 messages Nov 21, 2002

lore
Share & tools
lore
#0 lore raw

Hi All,
I am running zebra's ospfd version 0.93a in my network.
On one of my extreme end router when I do 'ip route show' I can see that there are some routes learnt by zebra, but it doesn't show the associated matric. When I do 'sh ip route' at ospfd's terminal I am able to see the associated matrices. I am not able to reach the nodes learnt by ospf, but on;y to directy connected node.

Can anyone suggest me how should I resolve this problem.

Thanks,
NItin

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus – Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines · nitin panjwani

Hi All,
I am running zebra's ospfd version 0.93a in my network.
On one of my extreme end router when I do 'ip route show' I can see that there are some routes learnt by zebra, but it doesn't show the associated matric.

You should be able to see the "weight" there.

Quoted 2 lines

When I do 'sh ip route' at ospfd's terminal I am able to see the associated matrices.

What you see in ospfd is the OSPF database and not the routing table itself. ospfd would calculate the best route based on its database and would only pass that best route to zebra which installs it in the routing table.

Quoted 3 lines

I am not able to reach
the nodes learnt by ospf, but on;y to directy connected node.

What is the topology and the configuration of your ospfd and an exerpt of your routing table.

Ramin

Quoted 6 lines

Can anyone suggest me how should I resolve this problem.

Thanks,
NItin

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/