routing 2 internal & 2 external nic's
hi all,
i have one problem with routing.
what i will do is this: ISP router
|
ISP switch
| | | ( we have 3 ports)
| | |
Our switch
| |
| |
eth0 eth1
firewall-1 | |
(4 nics) eth2 eth3
| |
| |
DMZ switch ( one network )
| |
DMZ linux router(SNAT all
outgoing connection from LAN to one IP,
|
in the same network as DMZ ,default route to eth3 )
|
LAN i will that all outgoing traffic from DMZ get over eth2 - eth0 NIC's to ISP and over eth2 back to DMZ.
And all outgoing traffic from LAN get over eth3 - eth1 NIC's to ISP switch.
But allways i send packet from eth3 get away over eth0 (default route) ...
which ip rule i must set to do this routing?
thanks in advace
roman
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Roman,
: i will that all outgoing traffic from DMZ get over eth2 - eth0 NIC's to : ISP and over eth2 back to DMZ.
: And all outgoing traffic from LAN get over eth3 - eth1 NIC's to ISP switch.
This should give you some idea of how to solve this problem, although this is not a complete solution:
http://mailman.ds9a.nl/pipermail/lartc/2002q3/005003.html
You'll probably want to use "ip rule add iif eth0 table ISPA" or something similar.
You should read up and understand the how and why of multiple routing tables:
http://plorf.net/linux-ip/html/routing-tables.htm
Additionally, you'll need to read up on "ip rule":
http://plorf.net/linux-ip/html/tools-ip-rule.htm
Good luck,
-Martin
Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/