Skip to contentSkip to conversation

Fair Queuing

LARTC [email protected] 2 participants 4 messages Nov 22, 2002

lore
Share & tools
lore
#1 lore raw
Quoted 10 lines · On Friday 22 November 2002 14:54, [email protected] wrote:

Dear all,

Am trying to distribute our 256kbps internet link to our
internel LAN and want to give 32kbps each to our 8 nodes. how should one go about it.

I have a server with 2 LAN cards.

LAN (192.168.0.0/24)<----->Linux Box<------->Internet Router<------->ISP

Do you want them to be able to share the bandwidth, or is 32kbps the maximum they may get?

You can create 1 bounded class with rate = 256kbps and 8 child classes with rate = 32kbps. And you need 8 filter so put the traffic in the 8 classes. You can filter based on ip-address if the nodes has fixed ip-addresses. You can do this with htb or cbq.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to [email protected]

Thanx, I managed it to get the basic script working but the result IS NOT satisfactory. What is happening is this:-

When any user (ex 192.168.0.4 in my script) starts to download a file (Download1) after a while it settles down to the alloted bandwidth 32kbps. If he puts another download (Download 2) after a while it occupies approximately half of the total bandwidht alloted to 192.168.0.4. So far so good.....
NOW, when the user(192.168.0.4) cancels any one of the downloads (Say download 1) the other download (download 2) takes a very long time to grow up to the total alloted bandwidth i.e 32kbps.

Why is that happening?
I can't figure it out. Could SFQ Help?

Script :
___________________________________________________________
/sbin/tc qdisc add root dev eth1 handle 1:0 cbq bandwidth 10Mbit avpkt 1000 /sbin/tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 10Mbit rate 256Kbit allot 1514 bounded
/sbin/tc class add dev eth1 parent 1:1 classid 1:2 cbq bandwidth 256Kbit rate 32Kbit allot 1514 bounded
/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.0.4 flowid 1:2
/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.4 flowid 1:2
________________________________________________________________

Thanx in advance

PS: Yes, I want each individual user to get 32kbps ----- Original Message -----
From: "Stef Coene" <[email protected]>

Quoted 4 lines
Quoted 4 lines

Dear all,

Am trying to distribute our 256kbps internet link to our
internel LAN and want to give 32kbps each to our 8 nodes. how should

one

Quoted 7 lines
Quoted 6 lines

go about it.

I have a server with 2 LAN cards.

LAN (192.168.0.0/24)<----->Linux Box<------->Internet Router<------->ISP

Do you want them to be able to share the bandwidth, or is 32kbps the

maximum

Quoted 3 lines

they may get?

You can create 1 bounded class with rate = 256kbps and 8 child classes

with

Quoted 2 lines

rate = 32kbps. And you need 8 filter so put the traffic in the 8 classes. You can filter based on ip-address if the nodes has fixed ip-addresses.

You

Quoted 4 lines

can do this with htb or cbq.

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to [email protected]
Quoted 12 lines · On Saturday 23 November 2002 06:58, [email protected] wrote:

Thanx, I managed it to get the basic script working but the result IS NOT satisfactory. What is happening is this:-

When any user (ex 192.168.0.4 in my script) starts to download a file (Download1) after a while it settles down to the alloted bandwidth 32kbps. If he puts another download (Download 2) after a while it occupies approximately half of the total bandwidht alloted to 192.168.0.4. So far so good.....
NOW, when the user(192.168.0.4) cancels any one of the downloads (Say download 1) the other download (download 2) takes a very long time to grow up to the total alloted bandwidth i.e 32kbps.

Quoted 1 line

Why is that happening?

I'm not sure, but when the scond download is started, both ends of the connection are using as much bandwidth as possible untill packets are dropped. If the connection has suddenly more bandwidth because the other download is stopped, it takes some time before both ends of the connection realize this. And when they do so, they are trying to push again as much as possible untill they are throttled to 64kbps. I think that's the way how tcp is handle the bandwidth limitaion.

Quoted 1 line

I can't figure it out. Could SFQ Help?

Not really. SFQ give each data stream the same opportunity to send something. If one of the streams is gone, the other can send all of the time. But you can try to add one to see what happens.

Quoted 11 lines

___________________________________________________________
/sbin/tc qdisc add root dev eth1 handle 1:0 cbq bandwidth 10Mbit avpkt 1000 /sbin/tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 10Mbit rate 256Kbit allot 1514 bounded
/sbin/tc class add dev eth1 parent 1:1 classid 1:2 cbq bandwidth 256Kbit rate 32Kbit allot 1514 bounded
/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.0.4 flowid 1:2
/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.4 flowid 1:2
________________________________________________________________

bandwidth is always the nic bandwidth so 10Mbit.
And shaping on eth1 is shaping all the packets that are leaving eth2. So the usung src and dst in 2 filters is useless. The src filter will never match.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/