Forced route
Hi All,
I have the following topology with four linux routers.
A----B-----C
| |
+..E0(D)E1.+
In this I want to send some traffic from interface E0 of router D to interface E1 of same router via route ABC. How can I do this?
Any help on this will be highly appreciable.
Thanks,
Nitin
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus – Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · nitin panjwani
Hi All,
I have the following topology with four linux routers.A----B-----C
| |
+..E0(D)E1.+In this I want to send some traffic from interface E0 of router D to interface E1 of same router via route ABC. How can I do this?
In general you can't. The traffic generated on D, destined for D never reaches the nic card. So, your statement above "from interface E0" is irrelevant. The packets would go down the IP stack to the loopback and come back up again.
What are A, B or C? If there is ability to do nat, you can send packets to, eg, A and have A DNAT it to E1 and SNAT it to A. Doing this and having the right routes on A, B and C and of course D, you can do what you're asking.
Ramin
Quoted 4 lines
Any help on this will be highly appreciable.
Thanks,
Nitin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/